Site icon Trusted Industrial Flanges Manufacturers, Pipe Fittings Suppliers

Hot Induction Bend Supplier & Exporter

Hot Induction Bend Suppliers in India

Hot Induction Bending, ASME B16.9 Hot Induction Bend Exporter

Hot Induction Bend Suppliers

Metalfed Engineering is prime supplier & exporter of Hot Induction Bends, is a controlled means of bending pipes through the application of local heating using high frequency induced electrical power.We are offering these Hot Induction Bend in stainless steel, carbon steel, and alloy steel in a complete range of diameters and radius.

Stainless Steel Hot Induction Bending can be manufactured from a wide range of high quality materials – including low and high yield carbon steels, alloy steels, stainless steels, Cr-Ni alloys and titanium. Hot Induction Bending is used for the purpose of surface hardening steels, induction technology when used in pipe bending consists basically of an induction coil placed around the pipe to be bent. Hot Induction bends are manufactured in a factory by passing a length of straight pipe through an induction bending machine.

There are different levels of hot induction bending depending on the radius of the pipe bend. The 5D Hot Induction Bend means that the bends has been bent to have a radius of 5 times the outer diameter of the pipe and same as in 4D Hot Induction Bend have a radius of 4 times the outer diameter of the pipe. This is useful in systems where the curvature has to be smooth and the change of direction has to take place regularly.

Our offered Hot Induction bends come in standard bend angles like 45°, 90°, etc. The Hot Induction Bend radius is specified as a function of the diameter. If you are looking for Hot Induction Bend Carbon Steel shipped to your country then contact us anytime for full quotation. Check our free sample of Stainless Steel Hot Induction Bend along free quotation. Buy Hot Induction Bend at best price.

All our Hot Induction Bends are supplied with Test Certificates as per EN 10204 3.1, with complete chemical and physical test results.Buttweld Hot Induction Bend designed as per the industry standards, which are manufactured using high grade material that assures its durability & long service life under the supervision of skilled professionals that having excellent knowledge of development.

Check ASME B16.9 Hot Induction Bend Dimensions, 5D Hot Induction Bend, 3D Hot Induction Bend, Hot Induction Bend Price in India.

High Quality Hot Induction Bend Suppliers in Mumbai, SS Hot Induction Bend, Hot Induction Bend Manufacturer in India.

ASME B16.9 Hot Induction Bend Specifications
Dimension

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Size

1/2″NB TO 48″NB IN.

DIN

DIN2605, DIN2615, DIN2616, DIN2617, DIN28011

Bend Radii

75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm

Bending Radius(R)

R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Bending angle (θ)

45°, 90°

Form

Butt weld Hot Induction Bend, Hot Induction Bending

ASME B16.9 Hot Induction Bend Dimensions

Standard Bending radius (R): R=3D, 4D, 5D, 6D, 7D, 8D, 9D, 10D

Our standard radii :

  • Ø26.9 – Ø168.3, CLR = 2.5 X diameter
  • Ø219.1 – Ø508 Bauart 5
Standard pipe Spec . Bauart 5 2,5D
DN Diameter [ØD] CLR CLR CLR
20 26,9 110   67
25 33,7 110   84
32 42,4 110   106
40 48,3 110   212
50 60,3 125   151
65 76,1   175 190
80 88,9   205 222
100 114,3   270 286
125 139,7   330 350
150 168,3   390 421
200 219,1   510  
250 273   650  
300 323,9   775  
350 355,6   850  
400 406,4   970  
500 508   1245  
Nominal pipe size Outside Diameter at Bevel Center to End
D C M
DN INCH Series A Series B
15 1/2 21.3 18 25
20 3/4 26.9 25 29
25 1 33.7 32 38
32 11/4 42.4 38 48
40 11/2 48.3 45 57
50 2 60.3 57 64
65 21/2 76.1(73) 76 76
80 3 88.9 89 86
90 31/2 101.6 95
100 4 114.3 108 105
125 5 139.7 133 124
150 6 168.3 159 143
200 8 219.1 219 178
250 10 273.0 273 216
300 12 323.9 325 254
350 14 355.6 377 279
400 16 406.4 426 305
450 18 457.2 478 343
500 20 508.0 529 381
550 22 559 419
600 24 610 630 432
650 26 660 495
700 28 711 720 521
750 30 762 559
800 32 813 820 597
850 34 864 635
900 36 914 920 673
950 38 965 711
1000 40 1016 1020 749
1050 42 1067 762 711
1100 44 1118 1120 813 762
1150 46 1168 851 800
1200 48 1220 1220 889 838
16 Gauge Hot Induction Bend Radius
Gauge Induction Bend Radius
Includes Minimum Closeness of Cutout to Bend
Induction Bend Radius
(Refers to Inner Radius)
11 gauge (0.120″ |3.05mm) .5″ .07″, .08″, .09″, .1″, .125″
14 gauge (0.075″ | 1.9 mm) .275″ .05″, .055″, .062″, .07″, .075″
.375″ .07″, .105″
.5″ .09″, .11″, .115″, .12″
1.375″ .4″
16 gauge (0.060″ | 1.52 mm) .2″ .035″, .05″
.265″ .05″, .055″, .075″, .08″
.375″ .07″
.5″ .105″, .12″
18 gauge (0.048″ | 1.22 mm) .2″ .04″, .045″, .05″
.265″ .06″, .07″, .08″, .085″
.375″ .1″, .125″
.5″ .115″, .12″
20 gauge (0.035″ | 0.89 mm) .2″ .05″
.265″ .06″, .07″
.375″ .095″
22 gauge (0.029″ | 0.74 mm) .2″ .05″
.265″ .04″, .08″
24 gauge (0.024″ | 0.61 mm) .2″ .04″
.265″ .08″
ASME B 16.9 Hot Induction Bend Types
  • Hot Induction Bend Fitting
  • Hot Induction Bending
  • Stainless Steel Hot Induction Bend
  • Butt weld Hot Induction Bend
  • ASME B16.9 Hot Induction Bend
  • ASTM A234 WPB Hot Induction Bend
  • Carbon Steel Hot Induction Bend
  • Buttweld Hot Induction Bend
  • SS Hot Induction Bend
  • ASME B16.9 Hot Induction Bend
  • Steel Hot Induction Bend
  • BW Hot Induction Bend
  • ANSI B16.9 Hot Induction Bend
  • Hastelloy Hot Induction Bend
  • SS Hot Induction Bend
  • Nickel Alloy Hot Induction Bend
  • Seamless Buttweld Hot Induction Bend
  • Hot Induction Bend Steels
  • Hot Induction Bend Carbon Steel
  • Duplex Steel Hot Induction Bend
  • Hot Induction Bend ASME B16.9
  • Steel Hot Induction Bend
  • Hot Induction Bend BW
  • Hot Induction Bend Stainless Steel

Hot Induction Bend

Category: Hot Induction Bend

In the context of pipelines, hot bending is used to create bends in pipes that are used for transporting fluids or gases. These bends are typically needed to navigate around obstacles or to follow the contours of the land. Hot bending is preferred over cold bending because it produces a smoother, more consistent bend without causing damage to the pipe’s structural integrity.

Category: Hot Induction Bend

Hot bending involves heating the pipe to a high temperature before bending it, while cold bending is done at room temperature or slightly above. Hot bending is generally preferred for creating larger bends or more complex shapes, while cold bending is more suitable for smaller bends or those with a simpler shape. Hot bending also produces a smoother finish and is less likely to cause damage to the material being bent.

Category: Hot Induction Bend

Hot bending is a process used to create bends or curves in metal tubes or pipes. It involves heating the material to a high temperature and then bending it into the desired shape. This process can be used for a variety of materials, including steel, stainless steel, and aluminum.

Category: Hot Induction Bend

There are several manufacturers of hot induction bends in India. Some of the well-known companies in this field include Metalfed Engineering. It is important to do research and choose a reliable and reputable manufacturer when selecting hot induction bends for a project.

ASME B 16.9 Hot Induction Bend- Applications & Industries

We are well-known exporter and supplier of high quality Carbon Steel Hot Induction Bend, ASME B16.9 Hot Induction Bend We supply Hot Induction Bend to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications.Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, NABL approved Lab Test Report, Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate etc.

Ready Stock of Hot Induction Bend Export to

ASIA: India, Indonesia, Japan, Malaysia,Bangladesh, Cambodia, Maldives, Myanmar, Singapore, South Korea, Vietnam, Sri Lanka, Taiwan, Thailand.
AFRICA: Algeria, Angola, Egypt, Equatorial Guinea, Gabon, Libya, Nigeria, South Africa, Sudan, The Republic Of Congo.
EUROPE: Albania, Austria, Belgium, Croatia, Czech Republic, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Malta, Netherlands, Norway, Portugal, Russia, Slovakia, Slovenia, Spain, Switzerland, UK, Ukraine.
NORTH AMERICA: Costa Rica, Bahamas, Canada,Denmark, Jamaica, Mexico, Panama, Trinidad And Tobago, Puerto Rico, USA.
SOUTH AMERICA: Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Venezuela.
MIDDLE EAST: Bahrain, Cyprus, Iran, Iraq, Jordan, Kuwait, Oman, Qatar, Saudi Arabia (KSA), Syria, Turkey, United Arab Emirates (UAE), Yemen.

Stainless Steel Hot Induction Bend Supplier
Ahmedabad, Al Jubail, Al Khobar, Aberdeen, Abu Dhabi, Ahvaz, Algiers, Ankara, Atyrau, Bangkok, Bengaluru, Bhopal, Bogota, Brisbane, Busan, Calgary, Caracas, Chandigarh, Cairo, Chennai, Chiyoda, Coimbatore, Colombo, Courbevoie, Doha, Dubai,Dallas, Dammam, Ernakulam, Edmonton, Faridabad, Gurgaon, Geoje-si, Gimhae-si, Granada, Hanoi, Haryana, Ho Chi Minh City, Hong Kong, Houston, Howrah, Hyderabad, Indore, Istanbul, Jakarta, Jeddah, Karachi, Kolkata, Kuala Lumpur, Kuwait City, La Victoria, Lagos, Lahore, London, Los Angeles, Ludhiana, Madrid, Manama, Mexico City, Milan, Melbourne, Montreal, Moscow, Mumbai, Muscat, Navi Mumbai, New Delhi, New York, Noida, Perth, Petaling Jaya, Pimpri-Chinchwad, Port-of-Spain, Pune, Rajkot, Rio de Janeiro, Riyadh, Santiago, Secunderabad, Seoul, Sharjah, Singapore, Surat, Sydney, Thiruvananthapuram, Toronto, Tehran, Thane, Ulsan, Vadodara, Visakhapatnam, Vung Tau.

 

CONTACT

Please send us the complete details of Hot Induction Bend ASME B16.9 and Hot Induction Bend Elbow requirement. We offer Buttweld Hot Induction Bend which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these Hot Induction Bend Carbon Steel at our valuable customers end. Buy ASME B16.9 Hot Induction Bend  at best price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us

Exit mobile version