Inconel Alloy 718 Socket weld Fittings, Alloy 718 Threaded Fittings, Nickel Alloy 718 High Pressure Forged Fittings Manufacturer in India.
If a lower cost, but relatively strong part is required, this Inconel 718 Forged Fitting is probably the way to go. The formation of gamma-prime crystals increases over time, especially after three hours of heat exposure of 850 Degree C (1,560 Degree F), and continues to grow after 72 hours of exposure. Alloy 718 Forged Threaded Union Tee Fittings is a popular material for valve springs due to its high fatigue properties and resistance against frequent loads. Fuel nozzles, afterburner ornaments, and other engine mechanisms are commonly made out of Inconel. And so heat treatment of such alloys is necessary to increase material toughness. Inconel Alloy 718 Forged Threaded Union Elbow Fittings exhibits excellent resistance to corrosive attack by seawater under stagnant and flowing conditions.
Metalfed Engineering is a distinguished stockist of Inconel 718 Threaded Fittings, which is another metal consisting of a nickel-copper alloy and can be used in extreme conditions with high heat. The main uses of ASTM B564 UNS N07718 Socket Weld Fittings include a gas turbine engine ducting and combustion liners. It is a nickel-chromium alloy that has additions of aluminum, where these additions increase its resistance to oxidation and various forms of corrosion.
Exporter of Inconel® Alloy 718 Threaded Tee, ASTM B564 UNS N07718 Socketweld Coupling, Incoloy 718 Forged Cross, Inconel 718 Forged Fittings Elbow, Alloy 2.4668 Threaded Pipe Cap, Inconel 718 Industrial Forged Fittings.
This nickel-based Inconel Alloy WNR 2.4668 Forged Threaded Fittings is made from nickel and chromium, alongside significant amounts of molybdenum, niobium, and iron. Because of its ease of construction, it is made into a variety of mechanisms for plant equipment.We are also stockholder of Inconel 600 Forged Fittings, Inconel 625 Forged Fittings and Incoloy 825 Forged Fittings. Contact us to get Inconel 718 Forged Fittings Price.
- Epoxy Coating
- Electro Polish
- Sand Blasting
- Intergranular Corrosion Test
- Tensile Test
- Hardness Test
- Good load bearing capacity
- Excellent versatility and weldability
- High tensile strength
Largest Stockist of ASME 16.11 Inconel Alloy 718 Socket weld Fittings, Inconel 718 Threaded Elbow, Incoloy Alloy 718 Forged Tee, Cross, ASME SB564 Inconel 718 Socket weld Coupling, 718 Inconel Forged End Cap, Inconel Alloy 718 Forged Union in all Dimensionat best price.
Inconel Alloy 718 Forged Fittings Specifications
| Product Name: | Inconel 718 Forged Fittings |
| Specifications: | ASTM / ASME B564 |
| Size: | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Dimensions: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Pressure Class: | Threaded End- 2000LBS/ 3000LBS/ 6000LBS Socket-weld End- 3000LBS/ 6000LBS/ 9000LBS |
| Thread: | BSPT, NPT, BSPP |
| Test Certificates: | Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc. |
| Material Test Certificates (MTC): | As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175 |
| Manufacturers of: | 90º Elbows, 45º Elbows, Equal Tee, Reducing Tee, Lateral Tee, Cross, Reducers, Half Coupling, Full Coupling, End Cap, Union, Reducer Insert, Boss, Nipple, Adapters, Street Elbow, Reducing Coupling, Bushing, Hex Plug, Square Head Plug, Round Head Plug, Bull Plug, Branch Outlet, 90° Outlet Elbow. |
| Uses & Applications: | Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders. |
| Export Network: | Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc |
Inconel 718 Forged Fittings Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Inconel 718 | 2.4668 | N07718 |
Alloy 718 Forged Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Ni | Cr | B | Mo | Co | Al | Ti | Nb | Cu |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.015 max | 50 – 55 | 17 – 21 | 0.006 max | 2.8 – 3.3 | 1.0 max | 0.2 – 0.8 | 0.65 – 1.15 | 4.75 – 5.5 | 0.3 max |
ASTM B564 UNS N07718 Inconel Forged Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000, MPa – 930 | Psi – 75,000, MPa – 482 | 45 % |
Inconel Alloy 718 Forged Fittings Size Range
| Below Mentioned Forged Fittings Size: 1/8″– 4″ Pressure Ratings – 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
|
| ASTM B564 Inconel Alloy 718 90° Elbow | ASTM B564 Inconel Alloy 718 Forged Tee |
| ASTM B564 Inconel Alloy 718 Forged Cross | ASTM B564 Inconel Alloy 718 Street Elbow |
| ASTM B564 Inconel Alloy 718 Screwed Bushing | ASTM B564 Inconel Alloy 718 Socket weld Cap |
| ASTM B564 Inconel Alloy 718 Forged Plug | ASTM B564 Inconel Alloy 718 45° Elbow |
| ASTM B564 Inconel Alloy 718 Union | ASTM B564 Inconel Alloy 718 Insert |
| ASTM B564 Inconel Alloy 718 Threaded Pipe Nipple | ASTM B564 Inconel Alloy 718 Screwed Coupling |
ASTM B564 Inconel 718 Forged Fittings Manufacturing Standards
| American Steel Forged Fittings Standard | |
| Standard Name | Standard Code |
| Forged fittings | ANSI ASME SB-564 |
| Socket-welding and Threaded forged fittings | ANSI ASME B16.11 |
| Socket-welding reducing Inserts | MSS SP-79 |
| Class 3000 steel socket-welding and threaded unions | MSS SP-83 |
| Swaged nipples and round plugs | MSS SP-95 |
| SW,TH and BW ends for integrally reinforced forged branch outlet | MSS SP-97 |
Inconel 718 Forged Fittings Dimensions
ASME B16.11 Threaded Fittings 90º Elbow, 45º Elbow, Cross, Tee. All dimensions are in inches
| Nominal Pipe Size | Centre to End Elbows, Tee, Crosses A | Centre to End 45º Elbows C | Outside Diameter of Band H | Minimum Wall Thickness G | Lengths of Thread Min | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2000# | 3000# | 6000# | 2000# | 3000# | 6000# | 2000# | 3000# | 6000# | 2000# | 3000# | 6000# | B | L2 | |
| 1/8 | 13/16 | 13/16 | 31/32 | 11/16 | 11/16 | 3/4 | 7/8 | 7/8 | 1 | .125 | .125 | .250 | .25 | .2639 |
| 1/4 | 13/16 | 31/32 | 1-1/8 | 11/16 | 3/4 | 7/8 | 7/8 | 1 | 1-5/16 | .125 | .130 | .260 | .32 | .4018 |
| 3/8 | 3/32 | 1-1/8 | 1-5/16 | 3/4 | 7/8 | 1 | 1 | 1-5/16 | 1-1/2 | .125 | .138 | .275 | .36 | .4078 |
| 1/2 | 1-1/8 | 1-5/16 | 1-1/2 | 7/8 | 1 | 1-1/8 | 1-5/16 | 1-1/2 | 1-13/16 | .125 | .161 | .321 | .43 | .5337 |
| 3/4 | 1-5/16 | 1-1/2 | 1-3/4 | 1 | 1-1/8 | 1-5/16 | 1-1/2 | 1-13/16 | 2-3/16 | .123 | .168 | .336 | .50 | .5457 |
| 1 | 1-1/2 | 1-3/4 | 2 | 1-1/8 | 1-5/16 | 1-3/8 | 1-13/16 | 2-3/16 | 2-7/16 | .145 | .196 | .391 | .58 | .6828 |
| 1-1/4 | 1-3/4 | 2 | 2-3/8 | 1-15/16 | 1-3/8 | 1-11/16 | 2-3/16 | 2-7/16 | 2-31/32 | .153 | .208 | .417 | .67 | .7068 |
| 1-1/2 | 2 | 2-3/8 | 2-1/2 | 1-3/8 | 1-11/16 | 1-23/32 | 2-7/16 | 2-31/32 | 3-5/16 | .158 | .218 | .436 | .70 | .7235 |
| 2 | 2-3/8 | 2-1/2 | 3-3/4 | 1-11/16 | 1-23/32 | 2-1/16 | 2-31/32 | 3-5/16 | 4 | .168 | .238 | .476 | .75 | .7565 |
| 2-1/2 | 3 | 3-1/4 | 3-3/4 | 2-1/16 | 2-1/16 | 2-1/2 | 3-5/8 | 4 | 4 | .221 | .301 | .602 | .932 | 1.138 |
| 3 | 3-3/8 | 3-3/4 | 4-3/16 | 2-1/2 | 2-1/2 | 3-1/8 | 4-5/16 | 4-3/4 | 4-3/4 | .236 | .327 | .655 | 1.016 | 1.200 |
| 4 | 3-3/16 | 4-1/2 | 4-1/2 | 3-1/8 | 3-1/8 | 3-1/8 | 5-3/4 | 5 | 6 | .258 | .368 | .735 | 1.094 | 1.300 |
ASME B16.11 Inconel Alloy 718 Threaded Fitting Coupling, Half Coupling, Cap. All dimensions are in inches. Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American Standard for Pipe Threads (ASA B2. 1).
| Nominal Pipe Size | End to End Couplings W | End to End Caps H |
Outside Diameter D |
End Wall Thickness G Min |
Length of Thead Min |
||||
|---|---|---|---|---|---|---|---|---|---|
| 3000# & 6000# |
3000# | 6000# | 3000# | 6000# | 3000# | 6000# | B | L2 | |
| 1/8 | 1-1/4 | 3/4 | 5/8 | 7/8 | 3/16 | .25 | .2639 | ||
| 1/4 | 1-3/8 | 1 | 1-1/16 | 3/4 | 1 | 3/16 | 1/4 | .32 | .4018 |
| 3/8 | 1-1/2 | 1 | 1-1/16 | 7/8 | 1-1/4 | 3/16 | 1/4 | .36 | .4078 |
| 1/2 | 1-7/8 | 1-1/4 | 1-5/16 | 1-1/8 | 1-1/2 | 1/4 | 5/16 | .43 | .5337 |
| 3/4 | 2 | 1-7/16 | 1-1/2 | 1-3/8 | 1-3/4 | 1/4 | 5/16 | .50 | .5457 |
| 1 | 2-3/8 | 1-5/8 | 1-11/16 | 1-3/4 | 2-1/4 | 3/8 | 7/16 | .58 | .6828 |
| 1-1/4 | 2-5/8 | 1-3/4 | 1-13/16 | 2-1/4 | 2-1/2 | 3/8 | 7/16 | .67 | .7068 |
| 1-1/2 | 3-1/8 | 1-3/4 | 1-7/8 | 2-1/2 | 3 | 7/16 | 1/2 | .70 | .7235 |
| 2 | 3-3/8 | 1-7/8 | 2 | 3 | 3-5/8 | 1/2 | 5/8 | .75 | .7565 |
| 2-1/2 | 3-5/8 | 2-3/8 | 2-1/2 | 3-5/8 | 4-1/4 | 5/8 | 3/4 | .932 | 1.138 |
| 3 | 4-1/4 | 2-9/16 | 2-11/16 | 4-1/4 | 5 | 3/4 | 7/8 | 1.016 | 1.200 |
| 4 | 4-3/4 | 2-11/16 | 2-15/16 | 5-1/2 | 6-1/4 | 7/8 | 1-1/8 | 1.094 | 1.300 |
ASME B16.11 Inconel Alloy 718 Threaded Fittings Plugs, Bushings. All dimensions are in inches.
| Nominal Pipe Size | Thead
Length (min) |
Plugs Square Head | Plugs Round Head | Hexagon Plugs & Bushings |
||||
|---|---|---|---|---|---|---|---|---|
| Height of Square (min) B |
Width Flats (min) C |
Nominal Diameter of Head
E |
Length (min) D |
Width Flats (min) F |
Hexagon Height min | |||
| Bushings G | Plug H |
|||||||
| 1/8 | 3/8 | 1/4 | 9/32 | 13/32 | 1-3/8 | 7/16 | – | 1/4 |
| 1/4 | 7/16 | 1/4 | 3/8 | 17/32 | 1-5/8 | 5/8 | 1/8 | 1/4 |
| 3/8 | 1/2 | 5/16 | 7/16 | 11/16 | 1-5/8 | 11/16 | 5/32 | 5/16 |
| 1/2 | 9/16 | 3/8 | 9/16 | 27/32 | 1-3/4 | 7/8 | 3/16 | 5/16 |
| 3/4 | 5/8 | 7/16 | 5/8 | 1-1/16 | 1-3/4 | 1-1/16 | 7/32 | 3/8 |
| 1 | 3/4 | 1/2 | 13/16 | 1-5/16 | 2 | 1-3/8 | 1/4 | 3/8 |
| 1-1/4 | 13/16 | 9/16 | 15/16 | 1-11/16 | 2 | 1-3/4 | 9/32 | 9/16 |
| 1-1/2 | 13/16 | 5/8 | 1-1/8 | 1-29/32 | 2 | 2 | 5/16 | 5/8 |
| 2 | 7/8 | 11/16 | 1-5/16 | 2-3/8 | 2-1/2 | 2-1/2 | 11/32 | 11/16 |
| 2-1/2 | 1-1/16 | 3/4 | 1-1/2 | 2-7/8 | 2-3/4 | 3 | 3/8 | 3/4 |
| 3 | 1-1/8 | 13/16 | 1-11/16 | 3-1/2 | 2-3/4 | 3-1/2 | 13/32 | 13/16 |
| 3-1/2 | 1-3/16 | 7/8 | 1-7/8 | 4 | 3 | 4-1/8 | 7/16 | 7/8 |
| 4 | 1-1/4 | 1-1/4 | 2-1/2 | 4-1/2 | 3 | 4-5/8 | 1/2 | 1-1/4 |
Inconel Alloy 718 Forged Fittings Weight Chart -Pounds per 100 pcs
| Name | WorkingPress. | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1-1/4” | 1-1/2” | 2” | # per 100 pcs |
|---|---|---|---|---|---|---|---|---|---|---|
| 90º Ells S/W | 3000# | 22 | 29 | 53 | 86 | 139 | 198 | 286 | 400 | |
| 90º Ells Screw |
3000# | 29 | 53 | 86 | 139 | 198 | 286 | 400 | 1452 | |
| 45º Ells S/W | 3000# | 22 | 38 | 53 | 86 | 139 | 198 | 374 | 396 | |
| 45º Ells Screw | 3000# | 29 | 53 | 86 | 139 | 198 | 374 | 718 | 800 | |
| Tees S/W | 3000# | 31 | 40 | 73 | 106 | 158 | 220 | 317 | 572 | |
| Tees Screw | 3000# | 40 | 73 | 106 | 158 | 220 | 317 | 512 | 2090 | |
| Union Screw | ||||||||||
| Union S/W | ||||||||||
| Coupling S/W | 3000# | 9 | 18 | 26 | 40 | 92 | 152 | 229 | 462 | |
| Coupling Screw | 3000# | 9 | 18 | 26 | 40 | 92 | 152 | 229 | 462 | |
| Caps S/W | 3000# | 11 | 13 | 24 | 37 | 62 | 114 | 147 | 297 | |
| Caps Screw | 3000# | 11 | 13 | 24 | 37 | 62 | 114 | 147 | 297 | |
| Hex. Head Plugs |
3000# | 4 | 7 | 18 | 26 | 48 | 86 | 99 | 198 | |
| Sq. Head Plugs |
3000# | 2 | 4 | 9 | 18 | 33 | 57 | 73 | 136 | |
| Hex. Bushing | 3000# | 7 | 7 | 9 | 13 | 18 | 42 | 44 | 136 | |
| Flush Bushing |
3000# | 4 | 4 | 7 | 9 | 15 | 33 | 37 | 132 |
Inconel 718 Forged Fittings Types and Standards
- Inconel 718 Socket Weld Elbow
- Inconel 718 Socket Weld Tee
- Inconel 718 Socket Weld Cross
- Inconel 718 Socket Weld Coupling
- Inconel 718 Socket Weld End Cap
- Inconel 718 Socket Weld Union
- Inconel 718 Socket Weld Reducer Insert
- Inconel 718 Socket Weld Boss
- Inconel 718 Socket Weld Branch Outlet
- Inconel 718 Socket weld Reducers
- Inconel 718 Socket Weld Nipple
- Inconel 718 Socket Weld Adapters
- Inconel 718 Threaded Elbow
- Inconel 718 Threaded Tee
- Inconel 718 Threaded Cross
- Inconel 7181 Threaded Coupling
- Inconel 718 Threaded Reducing Coupling
- Inconel 718 Threaded Pipe Cap
- Inconel 718 Threaded Bushing
- Inconel 718 Threaded Plug
- Inconel 718 Threaded Union
- Inconel 718 Threaded Nipple
- Inconel 718 Threaded Boss
- Inconel 718 Threaded Adapter
Note: Prices are based on product, material grade, and quantity. Contact us anytime to get full quotation.
Inconel Alloy 718 Threaded and Socket Weld Fittings – Applications & Industries
Oil & Gas Industries
Gas Processing Industries
Food Processing Industries
Petrochemical Industries
Chemical Industries
Power Generation Industries
Sugar Industries
Fertilizers Industries
We are leading Manufacturers, Exporters, and Suppliers of high quality Inconel 718 High Pressure Forged Fittings. We supply ANSI 16.11 Alloy 718 Threaded Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.
Ready Stock of Nickel Alloy 718 Forged Fittings Export to
Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe
Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City
AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela
Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu
Please send us the complete details of Inconel Alloy 718 Forged Threaded Fittings requirement. We are offering Inconel 718 Socket weld Elbow, and Alloy 718 Socket weld Tee which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these Inconel 718 Forged Elbow, Tee, Reducer Insert, Cross, Coupling, Union, Boss, Bushing, Plug, Nipple, Adapter at our valuable customers end. Buy Inconel Alloy 718 Forged Fittings at a cheap price from us.
sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us