Description

Manufacturer of SS ER-309L Welding Wire, AWS A5.9 Stainless Steel ER309L Filler Wire, ER 309L Filler Wire, SS 309L TIG Filler Wires in India. We as Metalfed Engineering a known manufacturer and distributor of SS ER-309L Filler Wires, which has high strength and crack-free welds, high heat resistance, corrosion-resistant hard welds, etc. SS ER-309L Welding Wire is similar in composition to Stainless Steel ER 309 except for less than 0.03% carbon content. This lower carbon content reduces the possibility of intergranular carbide precipitation. This increases resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium. Strength of this low-carbon alloy; however, Stainless Steel UNS S30903 Filler Wires may not be as great as that of niobium Alloy ER-309L Filler Wires is mainly suitable for the most challenging vertical and overhead welding applications. SS 309L TIG Filler Wire is used in forklift forks, tool steels, leaf springs, unknown/weldable steels, etc. It is mainly used in high dilution conditions, especially in dissimilar welds between stainless steels and carbon-manganese steels. For weldments of this steel, preheat and interpass temperatures depend on the hardenability of the base metal. As a guide, do not preheat mild steels; up to 250 Degrees C on hardenable steels. ER-309L Stainless Steel MIG Filler Wires can be welded if the service requirement is corrosion resistance below 400 Degrees C. However, for high-temperature structural applications, weld metal with controlled high carbon and low ferrite content should be used. Top demanding products in Metalfed is Industrial Flanges, Buttweld Fittings, Socket Weld Fittings, Threaded Fittings Exporter of ER 309L TIG MIG Filler Wire, Austenitic Stainless Steel ER-309L Filler Wires, Stainless Steel 1.4332 Filler Wire, 309L Stainless Steel Filler Wire, SS 309L Welding Filler Wire, ER309L Stainless Steel Industrial Filler Wire, Stainless Steel 309L Wire in all Sizes and…