Super Duplex Steel S32750 Threaded Fittings, ASTM A182 S32760 Socket Weld Fittings, SAF 2507 High Pressure Forged Fittings Manufacturer in India.

Super Duplex Steel 2507 Forged Fittings Suppliers in India

Super Duplex Steel UNS S32760 Forged Fittings is highly machinable and workable, allowing a designer to create complex shapes and products. Steel products are easily cleaned with non-toxic household products such as detergents, soaps or cleaning liquids. This keeps them looking new for longer and increases durability. Ultimately, this reduces waste and the relatively expensive initial purchase is worth it in the long run.

We as a Metalfed Engineering is a known exporter and supplier of Super Duplex Steel UNS S32750 Threaded Pipe Cap Fittings, which is available in a variety of finishes, from glossy to matte. Chromium is the alloying element that defines Alloy 2507 Threaded Bushing Fittings. The passive layer of chromium oxide, together with the surface protection, also blocks the diffusion of oxygen into the metal, which prevents corrosion of the metal’s internal structure. Chromium oxide ions are also similar in size to steel. Molecules, resulting in a strong bond between the two. This keeps the oxide ions firmly attached to the surface under normal working conditions. However, it is common to add even more chromium in Super Duplex Steel WNR 1.4410 Threaded Union Fittings to increase corrosion resistance. Chromium also acts as a ferrite stabilizer causing the ferrite microstructure to form in the alloy.

Exporter of Super Duplex Stainless Steel 2507 Threaded Tee, WERKSTOFF NR. 1.4410 Forged Cross, Duplex Steel 2507 Socketweld Coupling, Super Duplex 2507 Forged Elbow, ASME 16.11 Duplex Steel S32760 Threaded Pipe Cap, Super Duplex S32750 Industrial Forged Fittings.

Duplex SAF 2507 Threaded Cross Pipe Fittings have a high luster, making them an ideal choice for exposed finishes. ASTM A182 S32760 Forged Fittings can be brushed, etched, embossed and stained. Depending on the alloying element added, the properties can vary greatly.We are delivering Super Duplex 2507 Forged Fittings in close tolerances, in addition to in greater finish standards and dense structures, which makes these to deliver best process support.

Value Added Services

  • Epoxy Coating
  • Electro Polish
  • Sand Blasting
Testing

  • Intergranular Corrosion Test
  • Tensile Test
  • Hardness Test
Features

  • Good load bearing capacity
  • Excellent versatility and weldability
  • High tensile strength

Largest Stockholder of Duplex Stainless Steel 2507 Forged Tee, Super Duplex 2507 Socket weld Coupling, Duplex Steel S32760 Socket weld Fittings, ASME SA182 UNS S32760 Threaded Elbow, Super Duplex Steel S32750 Forged End Cap, Super Duplex S32760 Forged Union in all Dimensions.

Super Duplex 2507 Forged Fittings Specifications
Product Name: Super Duplex 2507 Forged Fittings
Specifications: ASTM A182 / ASME SA182 (UNS S32760/ S32750)
Size: 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Dimensions: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Pressure Class: Threaded End- 2000LBS/ 3000LBS/ 600LBS
Socket-weld End- 3000LBS/ 600LBS/ 9000LBS
Thread: BSPT, NPT, BSPP
Test Certificates: Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Manufacturers of: 90º Elbows, 45º Elbows, Equal Tee, Reducing Tee, Lateral Tee, Cross, Reducers, Half Coupling, Full Coupling, End Cap, Union, Reducer Insert, Boss, Nipple, Adapters, Street Elbow, Reducing Coupling, Bushing, Hex Plug, Square Head Plug, Round Head Plug, Bull Plug, Branch Outlet, 90° Outlet Elbow.
Uses & Applications: Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders.
Export Network: Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc
Super Duplex 2507 Forged Fittings Equivalent Grades
STANDARD WERKSTOFF NR. UNS
Super Duplex S32750 1.4410 S32750
Super Duplex S32950 1.4410 S32950
Super Duplex S32760 1.4410 S32760
Duplex SAF 2507 Forged Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
S32750 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min
S32950 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min
S32760 0.05 max 1.00 max 1.00 max 0.030 max 0.010 max 24.00 – 26.00 3.00 – 4.00 6.00 – 8.00 0.20 – 0.30 57.61 min
ASTM A182 Super Duplex 2507 Forged Fittings Mechanical Properties
Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S32750/S32760 7.8 0.281 1350 2460
Super Duplex 2507 Forged Fittings Size Range
Below Mentioned Forged Fittings Size: 1/8″– 4″
Pressure Ratings – 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
ASTM A182 Super Duplex 2507 90° Elbow ASTM A182 Super Duplex 2507 Forged Tee
ASTM A182 Super Duplex 2507 Forged Cross ASTM A182 Super Duplex 2507 Street Elbow
ASTM A182 Super Duplex 2507 Screwed Bushing ASTM A182 Super Duplex 2507 Socket weld Cap
ASTM A182 Super Duplex 2507 Forged Plug ASTM A182 Super Duplex 2507 45° Elbow
ASTM A182 Super Duplex 2507 Union ASTM A182 Super Duplex 2507 Insert
ASTM A182 Super Duplex 2507 Threaded Pipe Nipple ASTM A182 Super Duplex 2507 Screwed Coupling
ASTM A182 Duplex Steel S32750 / S32760 Forged Fittings Manufacturing Standards
American Steel Forged Fittings Standard
Standard Name Standard Code
Forged fittings ANSI ASME SA-182
Socket-welding and Threaded forged fittings ANSI ASME B16.11
Socket-welding reducing Inserts MSS SP-79
Class 3000 steel socket-welding and threaded unions MSS SP-83
Swaged nipples and round plugs MSS SP-95
SW,TH and BW ends for integrally reinforced forged branch outlet MSS SP-97
Super Duplex 2507 Forged Fittings Dimensions

ASME B16.11 Threaded Fittings 90º Elbow, 45º Elbow, Cross, Tee. All dimensions are in inches

Nominal Pipe Size Centre to End Elbows, Tee, Crosses A Centre to End 45º Elbows C Outside Diameter of Band H Minimum Wall Thickness G Lengths of Thread Min
2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# B L2
1/8 13/16 13/16 31/32 11/16 11/16 3/4 7/8 7/8 1 .125 .125 .250 .25 .2639
1/4 13/16 31/32 1-1/8 11/16 3/4 7/8 7/8 1 1-5/16 .125 .130 .260 .32 .4018
3/8 3/32 1-1/8 1-5/16 3/4 7/8 1 1 1-5/16 1-1/2 .125 .138 .275 .36 .4078
1/2 1-1/8 1-5/16 1-1/2 7/8 1 1-1/8 1-5/16 1-1/2 1-13/16 .125 .161 .321 .43 .5337
3/4 1-5/16 1-1/2 1-3/4 1 1-1/8 1-5/16 1-1/2 1-13/16 2-3/16 .123 .168 .336 .50 .5457
1 1-1/2 1-3/4 2 1-1/8 1-5/16 1-3/8 1-13/16 2-3/16 2-7/16 .145 .196 .391 .58 .6828
1-1/4 1-3/4 2 2-3/8 1-15/16 1-3/8 1-11/16 2-3/16 2-7/16 2-31/32 .153 .208 .417 .67 .7068
1-1/2 2 2-3/8 2-1/2 1-3/8 1-11/16 1-23/32 2-7/16 2-31/32 3-5/16 .158 .218 .436 .70 .7235
2 2-3/8 2-1/2 3-3/4 1-11/16 1-23/32 2-1/16 2-31/32 3-5/16 4 .168 .238 .476 .75 .7565
2-1/2 3 3-1/4 3-3/4 2-1/16 2-1/16 2-1/2 3-5/8 4 4 .221 .301 .602 .932 1.138
3 3-3/8 3-3/4 4-3/16 2-1/2 2-1/2 3-1/8 4-5/16 4-3/4 4-3/4 .236 .327 .655 1.016 1.200
4 3-3/16 4-1/2 4-1/2 3-1/8 3-1/8 3-1/8 5-3/4 5 6 .258 .368 .735 1.094 1.300

ASME B16.11 Super Duplex 2507 Threaded Fitting Coupling, Half Coupling, Cap. All dimensions are in inches. Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American Standard for Pipe Threads (ASA B3. 1).

Nominal Pipe Size End to End Couplings W End to
End Caps H
Outside
Diameter D
End Wall Thickness
G Min
Length of
Thead Min
3000# &
6000#
3000# 6000# 3000# 6000# 3000# 6000# B L2
1/8 1-1/4 3/4 5/8 7/8 3/16 .25 .2639
1/4 1-3/8 1 1-1/16 3/4 1 3/16 1/4 .32 .4018
3/8 1-1/2 1 1-1/16 7/8 1-1/4 3/16 1/4 .36 .4078
1/2 1-7/8 1-1/4 1-5/16 1-1/8 1-1/2 1/4 5/16 .43 .5337
3/4 2 1-7/16 1-1/2 1-3/8 1-3/4 1/4 5/16 .50 .5457
1 2-3/8 1-5/8 1-11/16 1-3/4 2-1/4 3/8 7/16 .58 .6828
1-1/4 2-5/8 1-3/4 1-13/16 2-1/4 2-1/2 3/8 7/16 .67 .7068
1-1/2 3-1/8 1-3/4 1-7/8 2-1/2 3 7/16 1/2 .70 .7235
2 3-3/8 1-7/8 2 3 3-5/8 1/2 5/8 .75 .7565
2-1/2 3-5/8 2-3/8 2-1/2 3-5/8 4-1/4 5/8 3/4 .932 1.138
3 4-1/4 2-9/16 2-11/16 4-1/4 5 3/4 7/8 1.016 1.200
4 4-3/4 2-11/16 2-15/16 5-1/2 6-1/4 7/8 1-1/8 1.094 1.300

ASME B16.11 Super Duplex 2507 Threaded Fittings Plugs, Bushings. All dimensions are in inches.

Nominal Pipe Size Thead

Length (min)
A

Plugs Square Head Plugs Round Head Hexagon Plugs
& Bushings
Height of Square (min)
B
Width Flats (min)
C
Nominal Diameter of Head

E

Length (min)
D
Width Flats (min)
F
Hexagon Height min
Bushings G Plug
H
1/8 3/8 1/4 9/32 13/32 1-3/8 7/16 1/4
1/4 7/16 1/4 3/8 17/32 1-5/8 5/8 1/8 1/4
3/8 1/2 5/16 7/16 11/16 1-5/8 11/16 5/32 5/16
1/2 9/16 3/8 9/16 27/32 1-3/4 7/8 3/16 5/16
3/4 5/8 7/16 5/8 1-1/16 1-3/4 1-1/16 7/32 3/8
1 3/4 1/2 13/16 1-5/16 2 1-3/8 1/4 3/8
1-1/4 13/16 9/16 15/16 1-11/16 2 1-3/4 9/32 9/16
1-1/2 13/16 5/8 1-1/8 1-29/32 2 2 5/16 5/8
2 7/8 11/16 1-5/16 2-3/8 2-1/2 2-1/2 11/32 11/16
2-1/2 1-1/16 3/4 1-1/2 2-7/8 2-3/4 3 3/8 3/4
3 1-1/8 13/16 1-11/16 3-1/2 2-3/4 3-1/2 13/32 13/16
3-1/2 1-3/16 7/8 1-7/8 4 3 4-1/8 7/16 7/8
4 1-1/4 1-1/4 2-1/2 4-1/2 3 4-5/8 1/2 1-1/4
Super Duplex 2507 Forged Fittings Weight Chart -Pounds per 100 pcs
Name WorkingPress. 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” # per 100 pcs
90º Ells S/W 3000# 22 29 53 86 139 198 286 400
90º Ells
Screw
3000# 29 53 86 139 198 286 400 1452
45º Ells S/W 3000# 22 38 53 86 139 198 374 396
45º Ells Screw 3000# 29 53 86 139 198 374 B3 800
Tees S/W 3000# 31 40 73 106 158 220 317 572
Tees Screw 3000# 40 73 106 158 220 317 512 2090
Union Screw
Union S/W
Coupling S/W 3000# 9 18 26 40 92 152 229 462
Coupling Screw 3000# 9 18 26 40 92 152 229 462
Caps S/W 3000# 11 13 24 37 62 114 147 297
Caps Screw 3000# 11 13 24 37 62 114 147 297
Hex.
Head Plugs
3000# 4 7 18 26 48 86 99 198
Sq.
Head Plugs
3000# 2 4 9 18 33 57 73 136
Hex. Bushing 3000# 7 7 9 13 18 42 44 136
Flush
Bushing
3000# 4 4 7 9 15 33 37 132
Super Duplex 2507 Forged Fittings Types and Standards
Note: Prices are based on product, material grade, and quantity. Contact us anytime to get full quotation.
Super Duplex 2507 Threaded and Socket Weld Fittings – Applications & Industries

We are leading Manufacturers, Exporters, and Suppliers of high quality Super Duplex 2507 High Pressure Forged Fittings. We supply ANSI 16.11 Duplex SAF 2507 Threaded Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Super Duplex 2507 Forged Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Super Duplex 2507 Forged Threaded Fittings requirement. We are offering Super Duplex 2507 Socket weld Elbow, and Super Duplex S32760 Socket weld Tee which are accurately designed to provide satisfaction to our customers. We have ready stock of  Duplex Steel S32750 Forged Elbow, Tee, Reducer Insert, Cross, Coupling, Union, Boss, Bushing, Plug, Nipple, Adapter at best price. Buy Super Duplex 2507 Forged Fittings at a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us