Mastodon
sales@metalfed.com
+91 9137898594

0
was successfully added to your cart.

HomeASME B16.11 Forged FittingsAlloy 20 Forged Fittings Supplier

Alloy 20 Forged Fittings Supplier

Carpenter 20 Threaded Fittings, Alloy 20Cb3® Socket Weld Fittings, Incoloy Alloy 20 High Pressure Forged Fittings Manufacturer in India.

Alloy 20 Forged Fittings Suppliers in India

Alloy 20 Forged Fitting is preferred in the quenched condition because of the higher elongations (that can be achieved at a given strength level) ease of manufacture. It is an austenitic steel that has an optimal amount of chromium and nickel. We as a Metalfed Engineering is a well-known supplier and stockist of Alloy 20 Socket Weld Fittings, which is easy to form and draw, and has good weldability. This preserved elongation of this steel explains its high hardness, toughness and superior fatigue life in the finished part. UNS N08020 Forged Threaded Union Elbow Fittings is a commonly available austenitic steel with good corrosion resistance and high carbon content.

Alloy 20Cb3® Forged Threaded Union Fittings is non-magnetic in the annealed condition and becomes increasingly magnetic when cold worked. Typical uses for this steel include: aircraft structural parts, trailer bodies, jigs, construction and automotive tires, roof drainage products, conveyor belts and a variety of industrial uses. Carpenter 20 Forged Threaded Union Tee Fittings is available in the market in different states such as annealed and in various hard-rolled states. It also
has moderately low embodied energy and a moderately low base cost.

Stockholder of ASTM B462 UNS N08020 Socketweld Coupling, WERKSTOFF NR. 2.4660 Forged Cross, NiCr20CuMo Alloy 20 Threaded Tee, Alloy 20 Forged Elbow, ASME 16.11 Alloy 20 Threaded Pipe Cap, Carpenter 20 Industrial Forged Fittings.

Table of Content

Incoloy Alloy 20 Forged Fitting is a normally available austenitic steel by means of good elevated carbon and corrosion resistance to allow for cold working to a range of tempers. WNR 2.4660 Forged Threaded Welding Boss Fittings enables higher tensile strengths through rolling with less loss of ductility. It is essentially non-magnetic when annealed. It is also easy to shape and stretch.

Value Added Services

  • Epoxy Coating
  • Electro Polish
  • Sand Blasting
Testing

  • Intergranular Corrosion Test
  • Tensile Test
  • Hardness Test
Features

  • Good load bearing capacity
  • Excellent versatility and weldability
  • High tensile strength

Exporter of ASME SB462 Alloy 20 Socket weld Coupling, Carpenter® Alloy 20 Socket weld Fittings, Alloy 2.4660 Threaded Elbow, Alloy 20 Forged Tee, Cross, Incoloy Alloy 20 Forged End Cap, Alloy 20 Forged Union in all Dimensions.

Alloy 20 Forged Fittings Specifications
Product Name: Alloy 20 Forged Fittings / Alloy 20Cb3®, Carpenter 20
Specifications: ASTM / ASME B462
Size: 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Dimensions: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Pressure Class: Threaded End- 2000LBS/ 3000LBS/ 6000LBS
Socket-weld End- 3000LBS/ 6000LBS/ 9000LBS
Thread: BSPT, NPT, BSPP
Test Certificates: Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Manufacturers of: 90º Elbows, 45º Elbows, Equal Tee, Reducing Tee, Lateral Tee, Cross, Reducers, Half Coupling, Full Coupling, End Cap, Union, Reducer Insert, Boss, Nipple, Adapters, Street Elbow, Reducing Coupling, Bushing, Hex Plug, Square Head Plug, Round Head Plug, Bull Plug, Branch Outlet, 90° Outlet Elbow.
Uses & Applications: Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders.
Export Network: Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

Alloy 20 Forged Fittings Equivalent Grades
STANDARD WERKSTOFF NR. UNS EN AFNOR
Alloy 20 2.4660 N08020 NiCr20CuMo Z2NCUD31-20AZ

Incoloy Alloy 20 Forged Fittings Chemical Composition
Grade C Mn Si S Cu Ni Cr Fe Mo P
Alloy 20 0.07 max 2.00 max 1.00 max 0.035 max 3.00 – 4.00 32.00 – 38.00 19.00 – 21.00 29.85 min* 2.00 – 3.00 0.045 max

ASTM B462 UNS N08020 Forged Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Alloy 20 8.1 g/cm3 1443 °C (2430 °F) Psi -80,000, MPa -551 Psi – 35,000, MPa – 241 30 %

Alloy 20 Forged Fittings Size Range
Below Mentioned Alloy 20 Forged Fittings Size: 1/8″– 4″
Pressure Ratings – 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
ASTM B462 Alloy 20 90° Elbow ASTM B462 Alloy 20 Forged Tee
ASTM B462 Alloy 20 Forged Cross ASTM B462 Alloy 20 Street Elbow
ASTM B462 Alloy 20 Screwed Bushing ASTM B462 Alloy 20 Socket weld Cap
ASTM B462 Alloy 20 Forged Plug ASTM B462 Alloy 20 45° Elbow
ASTM B462 Alloy 20 Union ASTM B462 Alloy 20 Insert
ASTM B462 Alloy 20 Threaded Pipe Nipple ASTM B462 Alloy 20 Screwed Coupling

ASTM B462 Alloy 20 Forged Fittings Manufacturing Standards
American Steel Forged Fittings Standard
Standard Name Standard Code
Forged fittings ANSI ASME SB-564
Socket-welding and Threaded forged fittings ANSI ASME B16.11
Socket-welding reducing Inserts MSS SP-79
Class 3000 steel socket-welding and threaded unions MSS SP-83
Swaged nipples and round plugs MSS SP-95
SW,TH and BW ends for integrally reinforced forged branch outlet MSS SP-97

ASTM B462 UNS N08020 Forged Fittings Dimensions

ASME B16.11 Threaded Fittings 90º Elbow, 45º Elbow, Cross, Tee. All dimensions are in inches

Nominal Pipe Size Centre to End Elbows, Tee, Crosses A Centre to End 45º Elbows C Outside Diameter of Band H Minimum Wall Thickness G Lengths of Thread Min
2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# B L2
1/8 13/16 13/16 31/32 11/16 11/16 3/4 7/8 7/8 1 .125 .125 .250 .25 .2639
1/4 13/16 31/32 1-1/8 11/16 3/4 7/8 7/8 1 1-5/16 .125 .130 .260 .32 .4018
3/8 3/32 1-1/8 1-5/16 3/4 7/8 1 1 1-5/16 1-1/2 .125 .138 .275 .36 .4078
1/2 1-1/8 1-5/16 1-1/2 7/8 1 1-1/8 1-5/16 1-1/2 1-13/16 .125 .161 .321 .43 .5337
3/4 1-5/16 1-1/2 1-3/4 1 1-1/8 1-5/16 1-1/2 1-13/16 2-3/16 .123 .168 .336 .50 .5457
1 1-1/2 1-3/4 2 1-1/8 1-5/16 1-3/8 1-13/16 2-3/16 2-7/16 .145 .196 .391 .58 .6828
1-1/4 1-3/4 2 2-3/8 1-15/16 1-3/8 1-11/16 2-3/16 2-7/16 2-31/32 .153 .208 .417 .67 .7068
1-1/2 2 2-3/8 2-1/2 1-3/8 1-11/16 1-23/32 2-7/16 2-31/32 3-5/16 .158 .218 .436 .70 .7235
2 2-3/8 2-1/2 3-3/4 1-11/16 1-23/32 2-1/16 2-31/32 3-5/16 4 .168 .238 .476 .75 .7565
2-1/2 3 3-1/4 3-3/4 2-1/16 2-1/16 2-1/2 3-5/8 4 4 .221 .301 .602 .932 1.138
3 3-3/8 3-3/4 4-3/16 2-1/2 2-1/2 3-1/8 4-5/16 4-3/4 4-3/4 .236 .327 .655 1.016 1.200
4 3-3/16 4-1/2 4-1/2 3-1/8 3-1/8 3-1/8 5-3/4 5 6 .258 .368 .735 1.094 1.300

ASME B16.11 Alloy 20 Threaded Fitting Coupling, Half Coupling, Cap. All dimensions are in inches. Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American Standard for Pipe Threads (ASA B2. 1).

Nominal Pipe Size End to End Couplings W End to
End Caps H		 Outside
Diameter D		 End Wall Thickness
G Min		 Length of
Thead Min
3000# &
6000#		 3000# 6000# 3000# 6000# 3000# 6000# B L2
1/8 1-1/4 3/4 5/8 7/8 3/16 .25 .2639
1/4 1-3/8 1 1-1/16 3/4 1 3/16 1/4 .32 .4018
3/8 1-1/2 1 1-1/16 7/8 1-1/4 3/16 1/4 .36 .4078
1/2 1-7/8 1-1/4 1-5/16 1-1/8 1-1/2 1/4 5/16 .43 .5337
3/4 2 1-7/16 1-1/2 1-3/8 1-3/4 1/4 5/16 .50 .5457
1 2-3/8 1-5/8 1-11/16 1-3/4 2-1/4 3/8 7/16 .58 .6828
1-1/4 2-5/8 1-3/4 1-13/16 2-1/4 2-1/2 3/8 7/16 .67 .7068
1-1/2 3-1/8 1-3/4 1-7/8 2-1/2 3 7/16 1/2 .70 .7235
2 3-3/8 1-7/8 2 3 3-5/8 1/2 5/8 .75 .7565
2-1/2 3-5/8 2-3/8 2-1/2 3-5/8 4-1/4 5/8 3/4 .932 1.138
3 4-1/4 2-9/16 2-11/16 4-1/4 5 3/4 7/8 1.016 1.200
4 4-3/4 2-11/16 2-15/16 5-1/2 6-1/4 7/8 1-1/8 1.094 1.300

ASME B16.11 Alloy 20 Threaded Fittings Plugs, Bushings. All dimensions are in inches.

Nominal Pipe Size Thead

Length (min)
A

 Plugs Square Head Plugs Round Head Hexagon Plugs
& Bushings
Height of Square (min)
B		 Width Flats (min)
C		 Nominal Diameter of Head

E

 Length (min)
D		 Width Flats (min)
F		 Hexagon Height min
Bushings G Plug
H
1/8 3/8 1/4 9/32 13/32 1-3/8 7/16 – 1/4
1/4 7/16 1/4 3/8 17/32 1-5/8 5/8 1/8 1/4
3/8 1/2 5/16 7/16 11/16 1-5/8 11/16 5/32 5/16
1/2 9/16 3/8 9/16 27/32 1-3/4 7/8 3/16 5/16
3/4 5/8 7/16 5/8 1-1/16 1-3/4 1-1/16 7/32 3/8
1 3/4 1/2 13/16 1-5/16 2 1-3/8 1/4 3/8
1-1/4 13/16 9/16 15/16 1-11/16 2 1-3/4 9/32 9/16
1-1/2 13/16 5/8 1-1/8 1-29/32 2 2 5/16 5/8
2 7/8 11/16 1-5/16 2-3/8 2-1/2 2-1/2 11/32 11/16
2-1/2 1-1/16 3/4 1-1/2 2-7/8 2-3/4 3 3/8 3/4
3 1-1/8 13/16 1-11/16 3-1/2 2-3/4 3-1/2 13/32 13/16
3-1/2 1-3/16 7/8 1-7/8 4 3 4-1/8 7/16 7/8
4 1-1/4 1-1/4 2-1/2 4-1/2 3 4-5/8 1/2 1-1/4

Alloy 20 Forged Fittings Weight Chart -Pounds per 100 pcs
Name WorkingPress. 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” # per 100 pcs
90º Ells S/W 3000# 22 29 53 86 139 198 286 400
90º Ells
Screw		 3000# 29 53 86 139 198 286 400 1452
45º Ells S/W 3000# 22 38 53 86 139 198 374 396
45º Ells Screw 3000# 29 53 86 139 198 374 600 800
Tees S/W 3000# 31 40 73 106 158 220 317 572
Tees Screw 3000# 40 73 106 158 220 317 512 2090
Union Screw
Union S/W
Coupling S/W 3000# 9 18 26 40 92 152 229 462
Coupling Screw 3000# 9 18 26 40 92 152 229 462
Caps S/W 3000# 11 13 24 37 62 114 147 297
Caps Screw 3000# 11 13 24 37 62 114 147 297
Hex.
Head Plugs		 3000# 4 7 18 26 48 86 99 198
Sq.
Head Plugs		 3000# 2 4 9 18 33 57 73 136
Hex. Bushing 3000# 7 7 9 13 18 42 44 136
Flush
Bushing		 3000# 4 4 7 9 15 33 37 132

ASTM B462 UNS N08020 Forged Fittings Types and Standards
Note: Prices are based on product, material grade, and quantity. Contact us anytime to get full quotation.
GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

Alloy 20 Threaded and Socket Weld Fittings – Applications & Industries

We are leading Manufacturers, Exporters, and Suppliers of high quality ASTM B462 UNS N08020 High Pressure Forged Fittings. We supply ANSI 16.11 Alloy 20 Threaded Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Incoloy Alloy 20 Forged Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Incoloy Alloy 20 Forged Threaded Fittings requirement. We are offering Alloy 20 Socket weld Elbow, and Alloy UNS N08020 Socket weld Tee which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these Carpenter® Alloy 20 Forged Elbow, Tee, Reducer Insert, Cross, Coupling, Union, Boss, Bushing, Plug, Nipple, Adapter at our valuable customers end. Buy Alloy 20 Forged Fittings at a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us