Mastodon
sales@metalfed.com
+91 9137898594

0
was successfully added to your cart.

HomeButtweld Pipe Fittings SuppliersCarbon Steel Pipe Fittings Supplier

Carbon Steel Pipe Fittings Supplier

Carbon Steel ASTM A234 WPB Buttweld Fittings Manufacturers in India, ASTM A420 LTCS WPL6 & WPL3 Pipe Fittings Price, ASTM A860 Pipe Fittings Exporter

Carbon Steel Pipe Fittings Suppliers in India

Carbon steel Pipe Fiting is made by an alloy of iron and carbon. There is no prescribed minimum content of other alloying elements for carbon steels; however, they often contain manganese. Carbon Steel ASTM A234 WPB Reducer Pipe Fittings cannot be hardened (to martensite) by heat treating, so this is usually achieved by cold working. Carbon steels are usually relatively soft and have low strength. However, Carbon Steel ASME SA 234 WPB Concentric Reducer Pipe Fittings have high ductility, which makes them excellent for machining, welding, and low cost. They have higher strengths, which is achieved through heat treatment. ASME SA 420 LTCS WPL6 Eccentric Reducer Pipe Fittings also retain their ductility, making them easily formable and machinable.

We as a Metalfed Engineering is a well-known manufacturer and exporter of CS Unequal Tee Pipe Fittings, which are very wear-resistant because they are almost always tempered. The mechanical properties of this ASTM A420 Low Temperature Carbon Steel WPL6 Equal Tee Pipe Fittings are enhanced by an authentic heat treatment followed by quenching and tempering, giving it a martensitic microstructure.

A Specialized Manufacturer of ASTM A234 WPB Pipe Elbow, ASTM A420 Gr WPL6 Tee, ASTM A420 grade WPL3 Cross, ASTM A860 WPHY 52 Bends, ASME B16.9 Carbon Steel Seamless Fittings, Carbon Steel Weld Fittings in all Dimensions and Sizes.

Table of Content

Heat treatment can only be performed on very thin sections; however additional alloying elements such as chromium, molybdenum and nickel can be added to enhance the steel’s ability to be heat treated and thus hardened. Carbon Steel ASTM A860 Lateral Tee Pipe Fittings have higher strength; however, this is at the expense of ductility and toughness. ASTM A234 WPB Buttweld Fittings has the highest hardness and toughness of carbon steels and the lowest ductility.

Value Added Services

  • Epoxy Coating
  • Electro Polish
  • Sand Blasting
Testing

  • Intergranular Corrosion Test
  • Tensile Test
  • Hardness Test
Features

  • Good load bearing capacity
  • Excellent versatility and weldability
  • High tensile strength

Largest Stockists of ASTM A860 WPHY 65 Seamless Pipe Fittings, WPHY 60 Welded Pipe Fittings, WPHY 42 Equal Tee, WPHY 70 90 Degree Elbow, WPHY 46 Long / Short Radius Elbow, CS Concentric Reducer, Carbon Steel Seamless Pipe Fittings Prices.

Carbon Steel Buttweld Fittings Specifications
Product Name: ASTM A234 WPB Pipe Fittings | ASTM A420 WPL6 & WPL3 Pipe Fittings | ASTM A860 Pipe Fittings
Specifications: ASME SA234, ASME SA420, ASME SA860
size: Welded Butt Weld Fittings:1/2″ – 48″
Seamless Butt Weld Fittings: 1/2″ – 10″
in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Dimensions: ASME/ANSI B16.9, MSS-SP-43, ASME B16.28, BS1560, BS4504, BS4504, BS10
Types: Seamless / Welded / Fabricated
Thickness: SCH 10, SCH 20, SCH 30, SCH 40, SCH 60, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XS, XXS available with NACE MR 01-75
Bending Radius: R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Carbon Steel Pipe Fitting
Elbows: Angle: 22.5 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1D, 1.5D, 2D, 2.5D, 3D, 4D, 5D, 6D, 7D, 8D, 10D-40D.
Standard: ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-75 JISB2311 JISB2312 JISB2313, DIN2605 GB, BS, ISO
Manufacturing process: Forge, Cast, Push, Press, etc.
Key markets and industries: Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (largely seamless).
Test Certificates (TC): Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Application: Fittings To Connect Pipe & Tubes in Petroleum, Chemical, Power, Gas, Construction, Metallurgy, Shipbuilding.
Schedule 10 fittings are an economical alternative for lower-pressure applications.
Schedule 40 fittings have a thicker wall for higher-pressure applications.

Carbon Steel Buttweld Fittings Equivalent Grades
Comparison of steel grades by chemistry
EN # EN name SAE UNS DIN BS 970 UNI JIS
Carbon steels
1.1141
1.0401
1.0453		 C15D
C18D		 1018 CK15
C15
C16.8		 040A15
080M15
080A15
EN3B		 C15
C16
1C15		 S15
S15CK
S15C
1.0503
1.1191
1.1193
1.1194		 C45 1045 C45
CK45
CF45
CQ45		 060A47
080A46
080M46		 C45
1C45
C46
C43		 S45C
S48C
1.0726
1.0727		 35S20
45S20		 1140/1146 35S20
45S20		 212M40
En8M
1.0715
1.0736		 11SMn37 1215 9SMn28
9SMn36		 230M07
En1A		 CF9SMn28
CF9SMn36		 SUM 25
SUM 22
1.0718
1.0737		 11SMnPb30
11SMnPb37		 12L14 9SMnPb28
9SMnPb36		 230M07 Leaded
En1A Leaded		 CF9SMnPb29
CF9SMnPb36		 SUM 22L
SUM 23L
SUM 24L

Carbon Steel Pipe Fittings Chemical Composition
Chemical composition of ASTM A234 Carbon and Alloy Steel Fittings
Grade C Mn P max S max Si Cr Mo Ni Cu Others
WPB
(1,2,3,4,5)		 0.30
max		 0.29-1.06 0.050 0.058 0.10
min		 0.40
max		 0.15
max		 0.40
max		 0.40
max		 V 0.08
max
WPC
(2,3,4,5)		 0.35
max		 0.29-1.06 0.050 0.058 0.10
min		 0.40
max		 0.15
max		 0.40
max		 0.40
max		 V 0.08
max
WP1 0.28
max		 0.30-0.90 0.045 0.045 0.10-0.50 0.44-0.65
WP12 CL1 0.05-
0.20		 0.30-0.80 0.045 0.045 0.60
max		 0.80-1.25 0.44-0.65
WP12 CL2 0.05-
0.20		 0.30-0.80 0.045 0.045 0.60
max		 0.80-1.25 0.44-0.65
WP11 CL1 0.05-
0.15		 0.30-0.60 0.030 0.030 0.50-1.00 1.00-1.50 0.44-0.65
WP11 CL2 0.05-
0.20		 0.30-0.80 0.040 0.040 0.50-1.00 1.00-1.50 0.44-0.65
WP11 CL3 0.05-
0.20		 0.30-0.80 0.040 0.040 0.50-1.00 1.00-1.50 0.44-0.65
WP22 CL1 0.05-
0.15		 0.30-0.60 0.040 0.040 0.50
max		 1.90-2.60 0.87-1.13
WP22 CL3 0.05-
0.15		 0.30-0.60 0.040 0.040 0.50
max		 1.90-2.60 0.87-1.13
WP5 CL1 0.15
max		 0.30-0.60 0.040 0.030 0.50
max		 4.0-6.0 0.44-0.65
WP5 CL3 0.15
max		 0.30-0.60 0.040 0.030 0.50
max		 4.0-6.0 0.44-0.65
WP9 CL1 0.15
max		 0.30-0.60 0.030 0.030 1.00
max		 8.0-10.0 0.90-1.10
WP9 CL3 0.15
max		 0.30-0.60 0.030 0.030 1.00
max		 8.0-10.0 0.90-1.10
WPR 0.20
max		 0.40-1.06 0.045 0.050 1.60-
2.24		 0.75-1.25
WP91 0.08-
0.12		 0.30-0.60 0.020 0.010 0.20-0.50 8.0-9.5 0.85-1.05 0.40
max		 V 0.18- 0.25
Nb 0.06-0.10
N 0.03-0.07
Al 0.02 max(6)
Ti 0.01 max(6)
Zr 0.01 max(6)
WP911 0.09-
0.13		 0.30-0.60 0.020 0.010 0.10-0.50 8.0-9.5 0.90-1.10 0.40
max		 V 0.18-0.25
Nb 0.060-0.10
N 0.04-0.09
Al 0.02 max(6)
B 0.0003-0.006
W 0.90-1.10
Ti 0.01 max(6)
Zr 0.01 max(6)
  • Fittings from bar or plate 0.35 max carbon.
  • Fittings from forgings 0.35 max Carbon and 0.35 max Silicon with no minimum.
  • The sum of Cu, Ni, Niobium, and Moly shall not exceed 1.00%.
  • For each reduction of 0.01% below the specified Carbon maximum, an increase of 0.06% Manganese above the specified maximum is permitted, up to a maximum of 1.35%.
  • The sum of Niobium and Moly shall not exceed 0.32%.
  • Applies to heat and product analyses

Carbon Steel Pipe Fittings Mechanical Properties
Tensile and Yield Strength ASTM A234 for Carbon and Alloy Steel Fittings WPB WPC,
WP11-CL2		 WP11-CL1,
WP22-CL1
WP5-CL1
WP9-CL1		 WP11-CL3,
WP22-CL3
WP5-CL3
WP9-CL3		 WP91
Tensile strength, minimum unless a range is given ksi (MPa) 60 (415) 70 (485) 60 (415) 75 (520) 90 (620)
Yield strength, min ksi (MPa) (0.2% offset or 0.5% extension under-load) 35 (240) 40 (275) 30 (205) 45 (310) 60 (415)
Elongation ASTM A234 for Carbon and Alloy Steel Fittings WPB,
WPC, WP11, WP22		 WP91
Longitud. Transverse Longitud. Transverse
Standard
round specimen, or small proportional specimen, min % in 4 D		 22 14 20 13
Rectangular specimen for wall thickness 5/16″ and over, and
for all small sizes tested in full section; min % in 2 in.		 30 20
Rectangular specimen for wall thickness less than 5/16″;
min % in 2 in (1/2″ wide specimen)		 see note

Note:  For each 0.79 mm decrease in wall thickness below 7.94 mm, a deduction of 1.5 % for longitudinal and 1.0 % for transverse from standard values are permitted

Carbon Steel Pipe Fittings Size Range
Below Mentioned Pipe Fitting Size: 1/2″ – 48″
ASTM A234 WPB Elbow – Long Radius ASTM A420 WPL6 Stub Ends
ASTM A420 WPL3 Elbow – Short Radius ASTM A860 WPHY 52 Cross
ASTM A860 WPHY 65 Reducing Elbow ASTM A860 WPHY 60 Reducing Cross
ASTM A860 WPHY 42 45° Elbow ASTM A860 WPHY 70 Tees
ASTM A860 WPHY 46 Fabricated Tee Carbon Steel ASTM A234 WPB End Cap
Carbon Steel WPB Reducer Carbon Steel A234 Coupling
Carbon Steel Concentric Reducer Carbon Steel A420 Pipe Nipple
Carbon Steel Eccentric Reducer Carbon Steel A860 5D Elbow
Carbon Steel A234 3D Elbow Carbon Steel Welded Pipe Fittings

Carbon Steel Buttweld Fittings Standards
German Steel Pipe Fittings Standard
Standard Name Standard Code
Steel butt-welding pipe fittings.elbows and bends DIN 2605
Steel butt-welding pipe fittings.tees DIN 2615
Steel butt-welding pipe fittings.reducers DIN 2616
Steel butt-welding pipe fittings.caps DIN 2617
American Steel Pipe Fittings Standard
Forged Durimet pipe fittings ANSI ASME SA-234
Factory-Made wrought steel pipe fittings ANSI ASME B16.9
Wrought steel butt-welding short radius elbows and returns ANSI ASME B16.28
Steel butt-welding fittings ISO 5251
Carbon Steel butt-welding fittings MSS SP-43
Forging butt-welding fittings MSS SP-75
Russian Steel Pipe Fittings Standard
Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design Gost17375
Carbon and low-alloy steel butt-welding fittings.Tees. Design Gost17376
Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design Gost30753
Carbon and low-alloy steel butt-weldings. Reducers. Design Gost17378
Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design Gost17379
Carbon and low-alloy steel butt-weldings fittings. General specifications Gost17380
Japanese Steel Pipe Fittings Standard
Universal steel butt-welding pipe fittings JIS B2311
Steel butt-welding pipe fittings JIS B2312
Steel plate butt-welding pipe fittings JIS B2313
Other Steel Pipe Fittings Standard
3 Butt-welding pipe fittings EN 1025
ASTM A234 Fitting Classes for Grades

CR : Corrosion resistant grade. S through WU Classes do not apply.

WPB-S : Seamless

WPB-W : Welded, Weldable, RT or UT all pipe starting material welds made with filler metal. All carbon steel pipe ffitting manufacturer welds except as excluded in A/SA234.
If UT is substituted for RT, all welds must be examined 100% for their length as required by A/SA234.

WPB-WX : RT all welds with or without filler metal.

WPB-WU : UT all welds with or without filler metal.

grade-grade-class : Insert grades (WPB-WPB) and class (S,W,WX, or WU). Applies to fittings meeting all chemical and physical requirements of both grades.

Carbon Steel Pipe Fittings Dimensional Tolerances

Tolerances of butt weld fittings (in inches) according to ASME/ANSI B16.9. for all carbon alloy fittings except short radius elbows and returns (ASME/ANSI B16.28).

Buttweld Fittings ASME B16.9 Tolerance (Elbow, Cap, Tee, Reducer) 90 Deg. & 45 Deg.
Elbow and Tee		 Pipe Reducer
& Lap Joint
Stub End		 Pipe Cap
Buttweld Fitting Dimension (NPS) Outside
Diameter
at Bevel		 Inside
Diameter
at End		 WallThickness T Center-to-End
Dimension
A ,C ,B		 Over-all
Length H		 Over-all
Length F
1/2 to 2-1/2 +0.06 Not less than 87.5%
of nominal thickness		 +/- 0.06 +/- 0.06 +/- 0.12
-0.03
3 to 3-1/2 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
4 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
5 to 8 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.25
10 to 18 +0.16 +/- 0.12 +/- 0.09 +/- 0.09 +/- 0.25
-0.12
20 to 24 +0.25 +/- 0.19 +/- 0.09 +/- 0.09 +/- 0.25
-0.19
26 to 30 +0.25 +/- 0.19 +/- 0.12 +/- 0.19 +/- 0.38
-0.19
32 to 48 +0.25 +/- 0.19 +/- 0.19 +/- 0.19 +/- 0.38
-0.19

Carbon Steel Dimensions and Tolerances MSS SP-43

The tolerances and dimensions defined in MSS SP-43 are substantially the same as defined in ASME/ANSI specifications (½ to 24 in). MSS SP-43 only covers buttweld fittings made for use with Schedule 10S and 5S pipe as defined in ANSI/ASME B36.19M also it covers short pattern stub ends suitable for use with Schedule 40S pipe.

  • MSS SP-43 tolerances are the same as for ASME/ANSI B16.9 and B16.28 except with regard to the outside diameter at the bevel:
  • Tolerance of OD at Bevel =
  • ± 0.03 in for NPS ½ to 4
  • +0.06, -0.03 in for NPS 5 to 8
  • +0.09, -0.03 in for NPS 10 to 18
  • +0.12, to -0.03 in for NPS 20 to 24

Carbon Steel Pipe Fittings Dimensions, Carbon Steel Pipe Fittings Weight

Dimensions and weights of ASME B16.9 Carbon Steel Buttweld 45 Degree Elbow, 90 Degree Elbows Short and Long Radius (NPS 1/2 to 24, schedule STD/XS)

Carbon Steel Buttweld Fittings Dimensions-45 Degree Elbow, 90 Degree Elbows

Pipe Elbow Nominal Size Pipe Elbow Outside
Diameter Y		 Wall Thickness T
(Pipe Elbow Schedule)		 45 Deg. Elbow LR Centre to Face B 45 Deg. Elbow LR
Weight		 90 Deg. Elbow LR Centre to Face A 90 Deg. Elbow LR Weight 90 Deg. Elbow SR Centre to Face A 90 Deg. Elbow SR Weight
mm in mm mm Schedule mm kg mm kg mm kg
15 1/2” 21.3 2.78 STD 15.9 0.04 38.1 0.08 – –
3.73 X.S 15.9 0.05 38.1 0.10 – –
20 3/4” 26.7 2.87 STD 11.1 0.04 28.6 0.08 – –
3.91 X.S 11.1 0.05 28.6 0.11 – –
25 1” 33.4 3.38 STD 22.2 0.09 38.1 0.15 25.4 0.11
4.55 X.S 22.2 0.11 38.1 0.19 25.4 0.14
32 11/4” 42.2 3.56 STD 25.4 0.14 47.6 0.28 31.75 0.18
4.85 X.S 25.4 0.2 47.6 0.39 31.75 0.24
40 11/2” 48.3 3.68 STD 28.6 0.2 57.1 0.4 38.1 0.26
5.08 X.S 28.6 0.25 57.1 0.5 38.1 0.35
50 2” 60.3 3.91 STD 34.9 0.36 76.2 0.72 50.8 0.5
5.54 X.S 34.9 0.5 76.2 1.0 50.8 0.68
65 21/2” 73.0 5.16 STD 44.4 0.73 95.2 1.46 63.5 0.95
7.01 X.S 44.4 0.91 95.2 1.82 63.5 1.27
80 3” 88.9 5.49 STD 50.8 1.1 114.3 2.18 76.2 1.45
7.62 X.S 50.8 1.45 114.3 2.86 76.2 1.95
100 4” 114.3 6.02 STD 63.5 2.1 152.4 4.2 101.6 2.8
8.56 X.S 63.5 2.9 152.4 5.7 101.6 3.9
125 5” 141.3 6.65 STD 79.4 3.4 190.0 6.8 127.0 4.8
9.5 X.S 79.4 5.0 190.0 10.0 127.0 6.5
150 6” 168.3 7.11 STD 95.2 5.1 229.0 10.1 152.4 6.8
10.97 X.S 95.2 7.7 229.0 15.3 152.4 10.2
200 8” 219.1 8.18 STD 127.0 10.2 305.0 20.4 203.0 13.6
12.7 X.S 127.0 15.5 305.0 30.9 203.0 20.9
250 10” 273.9 9.27 STD 159.0 18.1 381.0 36.1 254.0 24.1
12.7 X.S 159.0 24.4 381.0 48.8 254.0 32.5
300 12” 323.9 9.52 STD 190.0 26.6 457.0 53.1 305.0 35.4
12.7 X.S 190.0 35.0 457.0 70.0 305.0 46.7
350 14” 355.6 9.52 STD 222.0 34.1 533.0 68.1 356.0 45.4
12.7 X.S 222.0 45.0 533.0 90.0 356.0 60.0
400 16” 406.4 9.52 STD 254.0 45.0 610.0 89.3 406.0 59.5
12.7 X.S 254.0 59.0 610.0 118.0 406.0 78.7
450 18” 457.0 9.52 STD 286.0 56.5 686.0 113.0 457.0 75.6
12.7 X.S 286.0 75.0 686.0 150.0 457.0 100.0
500 20” 508.0 9.52 STD 318.0 85.0 762.0 140.0 508.0 93.5
12.7 X.S 318.0 112.5 762.0 186.0 508.0 124.0
600 24” 610.00 9.52 STD 381.0 101.5 914.0 203.0 610.0 135.0
12.7 X.S 381.0 134.5 914.0 269.0 610.0 179.0

Dimensions and weights of ASME B16.9 Carbon Steel Buttweld Tee and Cap (NPS 1/2 to 24, schedule STD/XS)

Carbon Steel Buttweld Fittings Dimensions-Tee and Cap

Buttweld Tee and Cap
Nominal Size		 Pipe Tee and Cap Outside
Diameter Y		 Pipe Tee and Cap Wall
Thickness T		 Buttweld Tee
Dimensions
(C and M)		 Buttweld Tee
Weight		 Buttweld Cap
End to End		 Buttweld Cap
Weight
mm in mm mm Schedule mm mm mm kg
15 1/2” 21.3 2.78 STD 25.4 0.58
3.73 X.S 25.4 0.21
20 3/4” 26.7 2.87 STD 28.6 0.21
3.91 X.S 28.6 0.27
25 1” 33.4 3.38 STD 38.1 0.34 38.1 0.1
4.55 X.S 38.1 0.43 38.1 0.14
32 11/4” 42.2 3.56 STD 47.6 0.64 38.1 0.14
4.85 X.S 47.6 0.75 38.1 0.18
40 11/2” 48.3 3.68 STD 57.1 0.95 38.1 0.18
5.08 X.S 57.1 1.13 38.1 0.23
50 2” 60.3 3.91 STD 63.5 1.45 38.1 0.27
5.54 X.S 63.5 1.72 38.1 0.32
65 21/2” 73.0 5.16 STD 76.2 2.45 38.1 0.41
7.01 X.S 76.2 2.95 38.1 0.45
80 3” 88.9 5.49 STD 85.7 3.45 50.8 0.64
7.62 X.S 85.7 4.3 50.8 0.82
100 4” 114.3 6.02 STD 105.0 5.7 63.5 1.13
8.56 X.S 105.0 7.3 63.5 1.54
125 5” 141.3 6.65 STD 124.0 9.1 76.2 1.91
9.5 X.S 124.0 11.8 76.2 2.59
150 6” 168.3 7.11 STD 143.0 13.6 88.9 2.95
10.97 X.S 143.0 19.0 88.9 4.1
200 8” 219.1 8.18 STD 178.0 25.0 101.6 5.0
12.7 X.S 178.0 33.5 101.6 7.3
250 10” 273.0 9.27 STD 216.0 41.0 127.0 9.1
12.7 X.S 216.0 54.0 127.0 12.0
300 12” 323.9 9.52 STD 254.0 57.0 152.4 13.6
12.7 X.S 254.0 77.0 152.4 17.0
350 14” 355.6 9.52 STD 279.0 73.0 165.1 15.9
12.7 X.S 279.0 93.0 165.1 21.0
400 16” 406.4 9.52 STD 305.0 91.0 178.8 20.0
12.7 X.S 305.0 120.0 178.8 26.0
450 18” 457.0 9.52 STD 343.0 127.0 203.2 26.0
12.7 X.S 343.0 165.0 203.2 34.0
500 20” 508.0 9.52 STD 381.0 227.0 228.6 33.0
12.7 X.S 381.0 270.0 228.6 43.0
600 24” 610.0 9.52 STD 432.0 345.0 266.7 46.0
12.7 X.S 432.0 430.0 266.7 61.0

Dimensions and Weights of ASME B16.9 Carbon Steel Buttweld Concentric Reducers and Eccentric Reducers(NPS 1/2 to 24, schedule STD/XS)

Carbon Steel Buttweld Fittings Dimensions-Concentric Reducers and Eccentric Reducers

Buttweld Reducer
Nominal Size		 Pipe Reducer Length H Pipe Reducer Schedule T Pipe Reducer
Weight
mm in mm Kg
20×15 3/4” x 1/2” 38.1 STD 0.07
XS 0.1
25×15 1” x 1/2” 50.8 STD 0.14
X.S 0.18
25×20 1” x 3/4” 50.8 STD 0.14
X.S 0.18
32×15 11/4” x 1/2” 50.8 STD 0.18
X.S 0.23
32×20 11/4” x 3/4“ 50.8 STD 0.18
X.S 0.23
32×25 11/4” x 1” 50.8 STD 0.18
X.S 0.23
40×15 11/2” x 1/2” 63.5 STD 0.27
X.S 0.32
40×20 11/2” x 3/4” 63.5 STD 0.27
X.S 0.32
40×25 11/2” x 1” 63.5 STD 0.27
X.S 0.32
40×32 11/2” x 11/4” 63.5 STD 0.27
X.S 0.32
50×15 2” x 1/2” 76.2 STD 0.41
X.S 0.54
50×20 2” x 3/4” 76.2 STD 0.41
X.S 0.54
50×25 2”x1” 76.2 STD 0.41
X.S 0.54
50×32 2” x 11/4” 76.2 STD 0.41
X.S 0.54
50×40 2” x 11/2” 76.2 STD 0.41
X.S 0.54
65×25 21/2” x 1” 88.9 STD 0.68
X.S 0.91
65×32 21/2” x 11/4” 88.9 STD 0.68
X.S 0.91
65×40 21/2” x 11/2” 88.9 STD 0.68
X.S 0.91
65×50 21/2” x 2” 88.9 STD 0.68
X.S 0.91
80×40 3” x 11/2” 88.9 STD 0.77
X.S 1.09
80×50 3”x2” 88.9 STD 0.91
X.S 1.22
80×65 3” x 21/2” 88.9 STD 0.91
X.S 1.27
100×40 4” x 11/2” 101.6 STD 1.36
X.S 1.91
100×50 4”x2” 101.6 STD 1.40
X.S 1.95
100×65 4” x 21/2” 101.6 STD 1.45
X.S 2.04
100×80 4”x3” 101.6 STD 1.59
X.S 2.08
125×80 5”x3” 127.0 STD 2.5
X.S 3.4
125 x 100 5”x4” 127.0 STD 2.7
X.S 3.8
150×50 6”x2” 140.0 STD 3.4
X.S 4.3
150×65 6” x 21/2” 140.0 STD 3.4
X.S 4.5
150×80 6”x3” 140.0 STD 3.6
X.S 4.8
150 x 100 6”x4” 140.0 STD 3.7
X.S 5.2
150 x 125 6”x5” 140.0 STD 3.9
X.S 5.4
200×80 8”x3” 152.4 STD 4.5
X.S 7.2
200 x 100 8”x4” 152.4 STD 5.0
X.S 7.7
200 x 125 8”x5” 152.4 STD 5.4
X.S 8.2
200 x 150 8”x6” 152.4 STD 5.9
X.S 8.6
250 x 100 10”x4” 178.0 STD 9.1
X.S 11.8
250 x 125 10”x5” 178.0 STD 9.5
X.S 13.6
250 x 150 10”x6” 178.0 STD 9.5
X.S 13.6
250 x 200 10”x8” 178.0 STD 10.0
X.S 14.0
300 x 150 12”x6” 203.0 STD 14.1
X.S 18.1
300 x 200 12”x8” 203.0 STD 14.5
X.S 19.1
300 x 250 12” x 10” 203.0 STD 15.4
X.S 20.0
350 x 200 14”x8” 330.0 STD 26.3
X.S 34.9
350 x 250 14” x 10” 330.0 STD 27.2
X.S 36.3
350 x 300 14” x 12” 330.0 STD 28.6
X.S 37.6
400 x 200 16”x8” 356.0 STD 31.8
X.S 42.6
400 x 250 16” x 10” 356.0 STD 33.1
X.S 43.5
400 x 300 16” x 12” 356.0 STD 34.5
X.S 45.4
400 x 350 16” x 14” 356.0 STD 35.4
X.S 46.3
450 x 250 18” x 10” 381.0 STD 38.0
X.S 52.1
450 x 300 18” x 12” 381.0 STD 39.0
X.S 53.5
450 x 350 18” x 14” 381.0 STD 40.0
X.S 54.9
450 x 400 18” x 16” 381.0 STD 40.8
X.S 53.5
500 x 250 20” x 10” 508.0 STD 53.0
X.S 79.9
500 x 300 20” x 12” 508.0 STD 54.4
X.S 82.0
500 x 350 20” x 14” 508.0 STD 57.6
X.S 80.2
500 x 400 20” x 16” 508.0 STD 58.9
X.S 82.0
500 x 450 20” x 18” 508.0 STD 61.7
X.S 82.0
600 x 300 24” x 12” 508.0 STD 63.5
X.S 84.4
600 x 350 24” x 14” 508.0 STD 65.3
X.S 86.8
600 x 400 24” x 16” 508.0 STD 68.0
X.S 90.4
600 x 450 24” x 18” 508.0 STD 72.6
X.S 96.5
600 x 500 24” x 20” 508.0 STD 77.1
X.S 102.5

Carbon Steel Buttweld Fittings Types
Note: Prices are based on product, material grade and quantity. Contact us anytime to get full quotation.
GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

Carbon Steel A234 WPB Buttweld Pipe Fittings – Applications & Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Carbon Steel A234 WPB Buttweld Pipe Fittings. We supply ANSI B16.9 Carbon Steel Pipe Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Carbon Steel Pipe Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Carbon Steel Buttweld Pipe Fittings requirement. We offer Carbon Steel Seamless Fittings, Carbon Steel Weld Fittings and ASTM A234 WPB Buttweld Pipe Fittings which are accurately designed to provide satisfaction to our customers. We have a team of highly skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these ASTM A860 Carbon Steel Elbow, Tee, ASTM A234 WPB Reducer, Bend, Cross, ASTM A234 WPB End Caps, Stub Ends, Coller, Pipe Nipple at our valuable customers end.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us