Manufacturer of Alloy 625 Pipe Fitings, ASTM B366 UNS N06625 Buttweld Fittings, Inconel WPNCMC Pipe Fitting, Inconel® Alloy 625 Seamless Pipe Fittings

Inconel 625 Pipe Fittings Suppliers in India

Metalfed Engineering is an eminent manufacturer, trader, and supplier of Inconel 625 Pipe Fittings, which is typically used for: Jet engine and Gas turbine operations. While Alloy 625 Pipe Fitting vary widely in their composition, they’re all made of nickel and chromium as their primary elements. Additionally, chromium is typically the second most abundant element in the chemical makeup of ASTM B366 UNS N06625 Pipe Fittings. This mixture of elements also is accountable for superior resistance to a wide range of corrosive surroundings of unusual severity as well as to high-temperature effects such as corrosion and carburization. Inconel Alloy WNR 2.4856 Pipe Fittings is able to withstand elevated temperatures and extremely corrosive environments due to several factors. Inconel alloy preserves excellent strength even at higher temperatures.
Alloy 625 Bend Pipe Fittings retains strength over a wide temperature range, attractive for high-temperature applications where aluminum and steel would succumb to creep as a result of thermally-induced crystal vacancies. When decisive strength, tensile strength, erosion resistance, and even melt resistance can be unhurried.This Inconel Alloy 625 Tee Pipe Fittings is characterized by excellent high-temperature creep properties; and exceptional resistance to oxidation at higher temperatures, even under cyclic conditions.

Reputed Exporter of ANSI B16.9 Incoloy 625 Butt weld Fittings, 625 Inconel® Seamless Pipe Fittings, WERKSTOFF NR. 2.4816 Welded Pipe Fittings, Alloy 625 Pipe Cap Stockist, Grade 625 Inconel Alloy Cross, ASME SB 366 Inconel Alloy 625 Pipe Bend, BS NA 21 Equal Tee, JIS NCF 625 Stub End.

Inconel 625 Cross Pipe Fittings is a solid solution strengthened Ni-base superalloy, which has high strength at high temperatures. The alloy matrix is supported by the contact of niobium with molybdenum that offers high gift without the need for precipitation-hardening conduct. We are also largest stockholder of Incoloy 800 Pipe Fittings and Inconel 600 Pipe Fittings at best price. Contact us to get Inconel 625 Pipe Fittings Price.

Value Added Services

  • Epoxy Coating
  • Electro Polish
  • Sand Blasting
Testing

  • Intergranular Corrosion Test
  • Tensile Test
  • Hardness Test
Features

  • Good load bearing capacity
  • Excellent versatility and weldability
  • High tensile strength

Huge Stock of Incoloy Alloy 625 Two Joint Pipe Fittings, ASTM B366 UNS N06625 Fittings, Inconel Alloy 625 Buttweld Elbow, Alloy 625 Reducer, Inconel Alloy 625 Equal Tee at best price in India.

Inconel Alloy 625 Buttweld Fittings Specifications
Product Name: Inconel 625 Pipe Fittings
Specifications: ASTM B366 / ASME SB366
size: Welded Butt Weld Fittings:1/2″ – 48″
Seamless Butt Weld Fittings: 1/2″ – 10″
in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Dimensions: ASME/ANSI B16.9, MSS-SP-43, ASME B16.28, BS1560, BS4504, BS4504, BS10
Types: Seamless / Welded / Fabricated
Thickness: SCH 10, SCH 20, SCH 30, SCH 40, SCH 60, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XS, XXS available with NACE MR 01-75
Bending Radius: R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Inconel Alloy Steel Pipe Fitting
Elbows: Angle: 22.5 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1D, 1.5D, 2D, 2.5D, 3D, 4D, 5D, 6D, 7D, 8D, 10D-40D.
Standard: ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-75 JISB2311 JISB2312 JISB2313, DIN2605 GB, BS, ISO
Manufacturing process: Forge, Cast, Push, Press, etc.
Key markets and industries: Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (largely seamless).
Test Certificates (TC): Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Application: Fittings To Connect Pipe & Tubes in Petroleum, Chemical, Power, Gas, Construction, Metallurgy, Shipbuilding.
Schedule 10 fittings are an economical alternative for lower-pressure applications.
Schedule 40 fittings have a thicker wall for higher-pressure applications.
ASTM B366 UNS N06625 Buttweld Fittings Equivalent Grades
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST OR
Inconel 625 N06625 2.4856 NC22DNB4M NiCr22Mo9Nb NCF 625 NA 21 ХН75МБТЮ ЭИ602
Incoloy Alloy 625 Pipe Fittings Chemical Composition
Grade C Mn Si S Al Fe Ti Cr2 Mo Nb + Ta Ni
625 0.10 0.50 0.50 0.015 0.40 5.0 0.40 20.0-23.0 8.0-10.0 3.15–4.15 58.0 min
Inconel 625 Pipe Fittings Mechanical Properties
Grade Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
625 8.4 g/cm3 1350 °C (2460 °F) Psi – 75,000 , MPa – 517 Psi – 1,35,000 , MPa -930 42.5 %
Incoloy 625 Pipe Fittings Size Range
Below Mentioned Pipe Fitting Size: 1/2″ – 48″
ASTM B366 Inconel 625 Elbow – Long Radius Inconel 625 ASTM B366 Stub Ends
Inconel 625 Elbow – Short Radius ASTM B366 Inconel Alloy 625 Cross
ASTM B366 Inconel 625 Reducing Elbow ASTM B366 Inconel 625 Reducing Cross
ASTM B366 Inconel 625 45° Elbow ASTM B366 Inconel 625 Tees
ASTM B366 Inconel 625 Fabricated Tee ASTM B366 Inconel 625 End Cap
ASTM B366 Inconel 625 Reducer ASTM B366 Inconel 625 Coupling
ASTM B366 Inconel 625 Concentric Reducer ASTM B366 Inconel 625 Pipe Nipple
ASTM B366 Inconel 625 Eccentric Reducer ASTM B366 Inconel 625 5D Elbow
ASTM B366 Inconel 625 3D Elbow ASTM B366 Inconel 625 Welded Pipe Fittings
Inconel 625 Buttweld Fittings Standards
American Steel Pipe Fittings Standard
Standard Code Standard Name
Forged Durimet pipe fittings ANSI ASME SA-366
Factory-Made wrought steel pipe fittings ANSI ASME B16.9
Wrought steel butt-welding short radius elbows and returns ANSI ASME B16.28
Inconel butt-welding fittings ISO 5251
Wrought Inconel butt-welding fittings MSS SP-43
Forging butt-welding fittings MSS SP-75
Japanese Steel Pipe Fittings Standard
Universal steel butt-welding pipe fittings JIS B2311
Steel butt-welding pipe fittings JIS B2312
Steel plate butt-welding pipe fittings JIS B2313
German Steel Pipe Fittings Standard
Steel butt-welding pipe fittings.elbows and bends DIN 2605
Steel butt-welding pipe fittings.tees DIN 2615
Steel butt-welding pipe fittings.reducers DIN 2616
Steel butt-welding pipe fittings.caps DIN 2617
Other Steel Pipe Fittings Standard
3 Butt-welding pipe fittings EN 1025
Inconel 625 Buttweld Fittings Dimensional Tolerances

Tolerance of Butt-welding Fittings ASME B16.9

Inconel 625 Buttweld Fittings Dimensional Tolerances

All Fittings[Note(1) and (2)] Center-to-End Diamensions Overall Length of Reducers and Lap Joint Stub Ends,F,H Overall Length of Caps, E 180-deg Returns
Nominal  Pipe Size(NPS) DN Outside Diameter at Bevel,D[Note(3) and (4)] Inside Diameter at End [Note(3) and (5)] 90-deg and 45-deg Long and Short Radius Elbows and Tees. A,B,C,M 3D Radius Elbows, A,B Center-to-Center Dimension, O Back-to-Face Demensoin, K Alignment of Ends, U
 1/2to2 1/2 15-65  +1.6-0.8 0.8 2 3 2 3 6 6 1
3to3 1/2 80-90 1.6 1.6 2 3 2 3 6 6 1
4 100 1.6 1.6 2 3 2 3 6 6 1
5to8 125-200  +2.4 -1.6 1.6 2 3 2 6 6 6 1
10to18 250-450  +4.0 -3.2 3.2 2 3 2 6 10 6 2
20to24 500-625  +6.4 -4.8 4.8 2 3 2 6 10 6 2
26to30 650-750  +6.4 -4.8 4.8 3 6 5 10
32to48 800-1200  +6.4 -4.8 4.8 5 6 5 10
All Fittings[Note(1) and (2)] Center-to-End Diamensions Nominal Pipe Size(NPS) DN Angularity Tolerance
Nominal  Pipe Size(NPS) DN Outside Diameter at Bevel,D[Note(3) and (4)] Inside Diameter at End [Note(3) and (5)] Outside Diameter of Lap,G Fillet Radius of Lap,R Lap Thickness Off Angle,Q Off Plane,P
 1/2to2 1/2 15-65  +1.6-0.8 0.8 +0,-1 +0,-1 +1.6,-0 1/2to4 15-100 1 2
3to3 1/2 80-90 1.6 1.6 +0,-1 +0,-1 +1.6,-0 5to8 125-200 2 4
4 100 1.6 1.6 +0,-1 +0,-2 +1.6,-0 10to12 250-300 3 5
5to8 125-200  +2.4 -1.6 1.6 +0,-1 +0,-2 +1.6,-0 14to16 350-400 3 6
10to18 250-450  +4.0 -3.2 3.2 +0,-2 +0,-2 +3.2,-0 18to24 450-625 4 `10
20to24 500-625  +6.4 -4.8 4.8 +0,-2 +0,-2 +3.2,-0 26to30 650-750 5 10
26to30 650-750  +6.4 -4.8 4.8 32to42 800-1050 5 13
32to48 800-1200  +6.4 -4.8 4.8 44to48 1100-1200 5 19

GENERAL NOTES:
(a)All dimensions are in mm.
(b)Tolerances are equal plus and minus except as noted.

NOTES:
(1)The inside diameter and the nominal wall thicknesat ends are to be specified by the purchaser.
(2)A minimum wall thickness of 87.5% applies unless the purchaser specifies a different wall thickness toletance.
(3)Out-of-round is the sum of absolute values of plus and minus tolerances.

Inconel 625 Buttweld Fittings Dimensions

Dimensions and weights of ASME B16.9 Inconel 625 Buttweld 45 Degree Elbow, 90 Degree Elbows Short and Long Radius (NPS 1/2 to 24, schedule STD/XS)

Inconel 625 Buttweld Fittings Dimensions-45 Degree Elbow, 90 Degree Elbows

Pipe Elbow Nominal Size Pipe Elbow Outside
Diameter Y
Wall Thickness T
(Pipe Elbow Schedule)
45 Deg. Elbow LR Centre to Face B 45 Deg. Elbow LR
Weight
90 Deg. Elbow LR Centre to Face A 90 Deg. Elbow LR Weight 90 Deg. Elbow SR Centre to Face A 90 Deg. Elbow SR Weight
mm in mm mm Schedule mm kg mm kg mm kg
15 1/2” 21.3 2.78 STD 15.9 0.04 38.1 0.08
3.73 X.S 15.9 0.05 38.1 0.10
20 3/4” 26.7 2.87 STD 11.1 0.04 28.6 0.08
3.91 X.S 11.1 0.05 28.6 0.11
25 1” 33.4 3.38 STD 22.2 0.09 38.1 0.15 25.4 0.11
4.55 X.S 22.2 0.11 38.1 0.19 25.4 0.14
32 11/4” 42.2 3.56 STD 25.4 0.14 47.6 0.28 31.75 0.18
4.85 X.S 25.4 0.2 47.6 0.39 31.75 0.24
40 11/2” 48.3 3.68 STD 28.6 0.2 57.1 0.4 38.1 0.26
5.08 X.S 28.6 0.25 57.1 0.5 38.1 0.35
50 2” 60.3 3.91 STD 34.9 0.36 76.2 0.72 50.8 0.5
5.54 X.S 34.9 0.5 76.2 1.0 50.8 0.68
65 21/2” 73.0 5.16 STD 44.4 0.73 95.2 1.46 63.5 0.95
7.01 X.S 44.4 0.91 95.2 1.82 63.5 1.27
80 3” 88.9 5.49 STD 50.8 1.1 114.3 2.18 76.2 1.45
7.62 X.S 50.8 1.45 114.3 2.86 76.2 1.95
100 4” 114.3 6.02 STD 63.5 2.1 152.4 4.2 101.6 2.8
8.56 X.S 63.5 2.9 152.4 5.7 101.6 3.9
125 5” 141.3 6.65 STD 79.4 3.4 190.0 6.8 127.0 4.8
9.5 X.S 79.4 5.0 190.0 10.0 127.0 6.5
150 6” 168.3 7.11 STD 95.2 5.1 229.0 10.1 152.4 6.8
10.97 X.S 95.2 7.7 229.0 15.3 152.4 10.2
200 8” 219.1 8.18 STD 127.0 10.2 305.0 20.4 203.0 13.6
12.7 X.S 127.0 15.5 305.0 30.9 203.0 20.9
250 10” 273.9 9.27 STD 159.0 18.1 381.0 36.1 254.0 24.1
12.7 X.S 159.0 24.4 381.0 48.8 254.0 32.5
300 12” 323.9 9.52 STD 190.0 26.6 457.0 53.1 305.0 35.4
12.7 X.S 190.0 35.0 457.0 70.0 305.0 46.7
350 14” 355.6 9.52 STD 222.0 34.1 533.0 68.1 356.0 45.4
12.7 X.S 222.0 45.0 533.0 90.0 356.0 60.0
400 16” 406.4 9.52 STD 254.0 45.0 610.0 89.3 406.0 59.5
12.7 X.S 254.0 59.0 610.0 118.0 406.0 78.7
450 18” 457.0 9.52 STD 286.0 56.5 686.0 113.0 457.0 75.6
12.7 X.S 286.0 75.0 686.0 150.0 457.0 100.0
500 20” 508.0 9.52 STD 318.0 85.0 762.0 140.0 508.0 93.5
12.7 X.S 318.0 112.5 762.0 186.0 508.0 124.0
625 24” 610.00 9.52 STD 381.0 101.5 914.0 203.0 610.0 135.0
12.7 X.S 381.0 134.5 914.0 269.0 610.0 179.0

Dimensions and weights of ASME B16.9 Inconel 625 Buttweld Tee and Cap (NPS 1/2 to 24, schedule STD/XS)

Inconel 625 Buttweld Fittings Dimensions-Tee and Cap

Buttweld Tee and Cap
Nominal Size
Pipe Tee and Cap Outside
Diameter Y
Pipe Tee and Cap Wall
Thickness T
Buttweld Tee
Dimensions
(C and M)
Buttweld Tee
Weight
Buttweld Cap
End to End
Buttweld Cap
Weight
mm in mm mm Schedule mm mm mm kg
15 1/2” 21.3 2.78 STD 25.4 0.58
3.73 X.S 25.4 0.21
20 3/4” 26.7 2.87 STD 28.6 0.21
3.91 X.S 28.6 0.27
25 1” 33.4 3.38 STD 38.1 0.34 38.1 0.1
4.55 X.S 38.1 0.43 38.1 0.14
32 11/4” 42.2 3.56 STD 47.6 0.64 38.1 0.14
4.85 X.S 47.6 0.75 38.1 0.18
40 11/2” 48.3 3.68 STD 57.1 0.95 38.1 0.18
5.08 X.S 57.1 1.13 38.1 0.23
50 2” 60.3 3.91 STD 63.5 1.45 38.1 0.27
5.54 X.S 63.5 1.72 38.1 0.32
65 21/2” 73.0 5.16 STD 76.2 2.45 38.1 0.41
7.01 X.S 76.2 2.95 38.1 0.45
80 3” 88.9 5.49 STD 85.7 3.45 50.8 0.64
7.62 X.S 85.7 4.3 50.8 0.82
100 4” 114.3 6.02 STD 105.0 5.7 63.5 1.13
8.56 X.S 105.0 7.3 63.5 1.54
125 5” 141.3 6.65 STD 124.0 9.1 76.2 1.91
9.5 X.S 124.0 11.8 76.2 2.59
150 6” 168.3 7.11 STD 143.0 13.6 88.9 2.95
10.97 X.S 143.0 19.0 88.9 4.1
200 8” 219.1 8.18 STD 178.0 25.0 101.6 5.0
12.7 X.S 178.0 33.5 101.6 7.3
250 10” 273.0 9.27 STD 216.0 41.0 127.0 9.1
12.7 X.S 216.0 54.0 127.0 12.0
300 12” 323.9 9.52 STD 254.0 57.0 152.4 13.6
12.7 X.S 254.0 77.0 152.4 17.0
350 14” 355.6 9.52 STD 279.0 73.0 165.1 15.9
12.7 X.S 279.0 93.0 165.1 21.0
400 16” 406.4 9.52 STD 305.0 91.0 178.8 20.0
12.7 X.S 305.0 120.0 178.8 26.0
450 18” 457.0 9.52 STD 343.0 127.0 203.2 26.0
12.7 X.S 343.0 165.0 203.2 34.0
500 20” 508.0 9.52 STD 381.0 227.0 228.6 33.0
12.7 X.S 381.0 270.0 228.6 43.0
625 24” 610.0 9.52 STD 432.0 345.0 266.7 46.0
12.7 X.S 432.0 430.0 266.7 61.0

Dimensions and Weights of ASME B16.9 Inconel 625 Buttweld Concentric Reducers and Eccentric Reducers(NPS 1/2 to 24, schedule STD/XS)

Inconel 625 Buttweld Fittings Dimensions-Concentric Reducers and Eccentric Reducers

Buttweld Reducer
Nominal Size
Pipe Reducer Length H Pipe Reducer Schedule T Pipe Reducer
Weight
mm in mm Kg
20×15 3/4” x 1/2” 38.1 STD 0.07
XS 0.1
25×15 1” x 1/2” 50.8 STD 0.14
X.S 0.18
25×20 1” x 3/4” 50.8 STD 0.14
X.S 0.18
32×15 11/4” x 1/2” 50.8 STD 0.18
X.S 0.23
32×20 11/4” x 3/4“ 50.8 STD 0.18
X.S 0.23
32×25 11/4” x 1” 50.8 STD 0.18
X.S 0.23
40×15 11/2” x 1/2” 63.5 STD 0.27
X.S 0.32
40×20 11/2” x 3/4” 63.5 STD 0.27
X.S 0.32
40×25 11/2” x 1” 63.5 STD 0.27
X.S 0.32
40×32 11/2” x 11/4” 63.5 STD 0.27
X.S 0.32
50×15 2” x 1/2” 76.2 STD 0.41
X.S 0.54
50×20 2” x 3/4” 76.2 STD 0.41
X.S 0.54
50×25 2”x1” 76.2 STD 0.41
X.S 0.54
50×32 2” x 11/4” 76.2 STD 0.41
X.S 0.54
50×40 2” x 11/2” 76.2 STD 0.41
X.S 0.54
65×25 21/2” x 1” 88.9 STD 0.68
X.S 0.91
65×32 21/2” x 11/4” 88.9 STD 0.68
X.S 0.91
65×40 21/2” x 11/2” 88.9 STD 0.68
X.S 0.91
65×50 21/2” x 2” 88.9 STD 0.68
X.S 0.91
80×40 3” x 11/2” 88.9 STD 0.77
X.S 1.09
80×50 3”x2” 88.9 STD 0.91
X.S 1.22
80×65 3” x 21/2” 88.9 STD 0.91
X.S 1.27
100×40 4” x 11/2” 101.6 STD 1.36
X.S 1.91
100×50 4”x2” 101.6 STD 1.40
X.S 1.95
100×65 4” x 21/2” 101.6 STD 1.45
X.S 2.04
100×80 4”x3” 101.6 STD 1.59
X.S 2.08
125×80 5”x3” 127.0 STD 2.5
X.S 3.4
125 x 100 5”x4” 127.0 STD 2.7
X.S 3.8
150×50 6”x2” 140.0 STD 3.4
X.S 4.3
150×65 6” x 21/2” 140.0 STD 3.4
X.S 4.5
150×80 6”x3” 140.0 STD 3.6
X.S 4.8
150 x 100 6”x4” 140.0 STD 3.7
X.S 5.2
150 x 125 6”x5” 140.0 STD 3.9
X.S 5.4
200×80 8”x3” 152.4 STD 4.5
X.S 7.2
200 x 100 8”x4” 152.4 STD 5.0
X.S 7.7
200 x 125 8”x5” 152.4 STD 5.4
X.S 8.2
200 x 150 8”x6” 152.4 STD 5.9
X.S 8.6
250 x 100 10”x4” 178.0 STD 9.1
X.S 11.8
250 x 125 10”x5” 178.0 STD 9.5
X.S 13.6
250 x 150 10”x6” 178.0 STD 9.5
X.S 13.6
250 x 200 10”x8” 178.0 STD 10.0
X.S 14.0
300 x 150 12”x6” 203.0 STD 14.1
X.S 18.1
300 x 200 12”x8” 203.0 STD 14.5
X.S 19.1
300 x 250 12” x 10” 203.0 STD 15.4
X.S 20.0
350 x 200 14”x8” 330.0 STD 26.3
X.S 34.9
350 x 250 14” x 10” 330.0 STD 27.2
X.S 36.3
350 x 300 14” x 12” 330.0 STD 28.6
X.S 37.6
400 x 200 16”x8” 356.0 STD 31.8
X.S 42.6
400 x 250 16” x 10” 356.0 STD 33.1
X.S 43.5
400 x 300 16” x 12” 356.0 STD 34.5
X.S 45.4
400 x 350 16” x 14” 356.0 STD 35.4
X.S 46.3
450 x 250 18” x 10” 381.0 STD 38.0
X.S 52.1
450 x 300 18” x 12” 381.0 STD 39.0
X.S 53.5
450 x 350 18” x 14” 381.0 STD 40.0
X.S 54.9
450 x 400 18” x 16” 381.0 STD 40.8
X.S 53.5
500 x 250 20” x 10” 508.0 STD 53.0
X.S 79.9
500 x 300 20” x 12” 508.0 STD 54.4
X.S 82.0
500 x 350 20” x 14” 508.0 STD 57.6
X.S 80.2
500 x 400 20” x 16” 508.0 STD 58.9
X.S 82.0
500 x 450 20” x 18” 508.0 STD 61.7
X.S 82.0
625 x 300 24” x 12” 508.0 STD 63.5
X.S 84.4
625 x 350 24” x 14” 508.0 STD 65.3
X.S 86.8
625 x 400 24” x 16” 508.0 STD 68.0
X.S 90.4
625 x 450 24” x 18” 508.0 STD 72.6
X.S 96.5
625 x 500 24” x 20” 508.0 STD 77.1
X.S 102.5
Inconel 625 Buttweld Fittings Types
Note: Prices are based on product, material grade and quantity. Contact us anytime to get full quotation.
ASTM B366 Inconel 625 Buttweld Pipe Fittings – Applications & Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Inconel Alloy 625 Buttweld Pipe Fittings. We supply ANSI B16.9 Incoloy 625 Pipe Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Inconel 625 Pipe Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Incoloy Alloy 625 Pipe Fittings requirement. We offer Alloy 625 Pipe Fittings which are accurately designed to provide satisfaction to our customers. We have huge ready stock of   Inconel 625 Buttweld Elbow, Incoloy 625 Tee, Reducer, Bend, Cross, End Caps, Stub Ends, Coller, Pipe Nipple at our valuable customers end. Buy ASTM B366 Inconel 625 Pipe Fittingat a lowest price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us