Alloy 800 Pipe Fitings, ASTM B366 UNS N08800 Buttweld Fittings, Inconel WPNIC Seamless Pipe Fitting, Inconel 800H Pipe Fittings Manufacturer in India

Inconel 800 Pipe Fittings Suppliers in India

We as a Metalfed Engineering is an eminent supplier and exporter of Incoloy 800 Pipe Fittings, which are typically used in high temperature applications. Alloy 800 Buttweld Fittings does not yield to general oxidation or pressure corrosion cracking produced by chloride ions, smooth in extreme temperature circumstances. These factors factors make Inconel Alloy UNS N08800 Pipe Fittings ideal alloys for applications from hot section gas turbines to deep sea well drilling. It is used as wire rope for mooring cables, propeller blades for motor patrol gunboats, submarine auxiliary propulsion motors, etc. Though exact measurements vary, reported statistics state the range of the Inconel Alloy WNR 1.4876 Pipe Fittings melting point between 2,350 Degree F and 2,460 Degree F (1,290 Degree C and 1,350 Degree C).

During powder bed fusion or directed energy deposition of Inconel 800 End Cap Pipe Fittings, dendrites form along the build direction, which is the direction of the highest temperature gradient during deposition, and elongated grains form in this direction as well. Alloy 800 Dish Cap Pipe Fittings is known for its ability to withstand incredibly high temperatures. At such high temperatures in the presence of oxidising agents, the titanium and niobium compositions of the oxide film on Inconel Alloy 800 Cross Pipe Fittings increase drastically to form a natural protective layer in the material.

Exporter of Incoloy 800HT Welded Pipe Fittings, ANSI B16.9 Incoloy 800 Butt weld Fittings, 800 Incoloy® Equal Tee Fittings, WERKSTOFF NR. 1.4876 Pipe Cap, ASME SB 366 Incoloy Alloy 800 Pipe Bend, Nickel Alloy 800 Stub End.

Incoloy 800 Buttweld Elbow is a completely austenitic advanced corrosion-resistant blend that offers resistance to together aqueous corrosion then attack at elevated fevers.We also have largest stock of Inconel 600 Pipe Fittings, Incoloy 825 Pipe Fittings, andInconel 625 Pipe Fittings at best price.

Value Added Services

  • Epoxy Coating
  • Electro Polish
  • Sand Blasting
Testing

  • Intergranular Corrosion Test
  • Tensile Test
  • Hardness Test
Features

  • Good load bearing capacity
  • Excellent versatility and weldability
  • High tensile strength

Stockholder of Incoloy Alloy 800 Two Joint Pipe Fittings, DIN 1.4958, 1.4859 Cross Fittings, Incoloy Alloy 800H Buttweld Elbow, Alloy 800 Reducer, Incoloy Alloy 800HT Equal Tee at best price in India.

Incoloy Alloy 800/800H/800HT Pipe Fittings Specifications
Product Name: Incoloy 800 Pipe Fittings | Incoloy 800H Pipe Fittings | Incoloy 800HT Pipe Fittings
Specifications: ASTM B366 / ASME SB366
size: Welded Butt Weld Fittings:1/2″ – 48″
Seamless Butt Weld Fittings: 1/2″ – 10″
in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Dimensions: ASME/ANSI B16.9, MSS-SP-43, ASME B16.28, BS1560, BS4504, BS4504, BS10
Types: Seamless / Welded / Fabricated
Thickness: SCH 10, SCH 20, SCH 30, SCH 40, SCH 60, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XS, XXS available with NACE MR 01-75
Bending Radius: R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Incoloy Alloy Steel Pipe Fitting
Elbows: Angle: 22.5 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1D, 1.5D, 2D, 2.5D, 3D, 4D, 5D, 6D, 7D, 8D, 10D-40D.
Standard: ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-75 JISB2311 JISB2312 JISB2313, DIN2605 GB, BS, ISO
Manufacturing process: Forge, Cast, Push, Press, etc.
Key markets and industries: Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (largely seamless).
Test Certificates (TC): Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Application: Fittings To Connect Pipe & Tubes in Petroleum, Chemical, Power, Gas, Construction, Metallurgy, Shipbuilding.
Schedule 10 fittings are an economical alternative for lower-pressure applications.
Schedule 40 fittings have a thicker wall for higher-pressure applications.
ASTM B366 UNS N08800 Buttweld Fittings Equivalent Grades
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T
Incoloy Alloy 800/800H/800HT Pipe Fittings Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ
Incoloy 800/800H/800HT Pipe Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %
Nickel Alloy 800 Pipe Fittings Size Range
Below Mentioned Pipe Fitting Size: 1/2″ – 48″
ASTM B366 Incoloy 800 Elbow – Long Radius Incoloy 800 ASTM B366 Stub Ends
Incoloy 800 Elbow – Short Radius ASTM B366 Incoloy Alloy 800 Cross
ASTM B366 Incoloy 800 Reducing Elbow ASTM B366 Incoloy 800 Reducing Cross
ASTM B366 Incoloy 800 45° Elbow ASTM B366 Incoloy 800 Tees
ASTM B366 Incoloy 800 Fabricated Tee ASTM B366 Incoloy 800 End Cap
ASTM B366 Incoloy 800 Reducer ASTM B366 Incoloy 800 Coupling
ASTM B366 Incoloy 800 Concentric Reducer ASTM B366 Incoloy 800 Pipe Nipple
ASTM B366 Incoloy 800 Eccentric Reducer ASTM B366 Incoloy 800 5D Elbow
ASTM B366 Incoloy 800 3D Elbow ASTM B366 Incoloy 800 Welded Pipe Fittings
Incoloy 800 Buttweld Fittings Standards
American Steel Pipe Fittings Standard
Standard Code Standard Name
Forged Durimet pipe fittings ANSI ASME SA-366
Factory-Made wrought steel pipe fittings ANSI ASME B16.9
Wrought steel butt-welding short radius elbows and returns ANSI ASME B16.28
Incoloy butt-welding fittings ISO 5251
Wrought Incoloy butt-welding fittings MSS SP-43
Forging butt-welding fittings MSS SP-75
Japanese Steel Pipe Fittings Standard
Universal steel butt-welding pipe fittings JIS B2311
Steel butt-welding pipe fittings JIS B2312
Steel plate butt-welding pipe fittings JIS B2313
German Steel Pipe Fittings Standard
Steel butt-welding pipe fittings.elbows and bends DIN 2605
Steel butt-welding pipe fittings.tees DIN 2615
Steel butt-welding pipe fittings.reducers DIN 2616
Steel butt-welding pipe fittings.caps DIN 2617
Other Steel Pipe Fittings Standard
3 Butt-welding pipe fittings EN 1025
Inconel Alloy 800 Buttweld Pipe Fittings Dimensional Tolerances

Tolerance of Butt-welding Fittings ASME B16.9

Inconel 800 Buttweld Fittings Dimensional Tolerances

All Fittings[Note(1) and (2)] Center-to-End Diamensions Overall Length of Reducers and Lap Joint Stub Ends,F,H Overall Length of Caps, E 180-deg Returns
Nominal  Pipe Size(NPS) DN Outside Diameter at Bevel,D[Note(3) and (4)] Inside Diameter at End [Note(3) and (5)] 90-deg and 45-deg Long and Short Radius Elbows and Tees. A,B,C,M 3D Radius Elbows, A,B Center-to-Center Dimension, O Back-to-Face Demensoin, K Alignment of Ends, U
 1/2to2 1/2 15-65  +1.6-0.8 0.8 2 3 2 3 6 6 1
3to3 1/2 80-90 1.6 1.6 2 3 2 3 6 6 1
4 100 1.6 1.6 2 3 2 3 6 6 1
5to8 125-200  +2.4 -1.6 1.6 2 3 2 6 6 6 1
10to18 250-450  +4.0 -3.2 3.2 2 3 2 6 10 6 2
20to24 500-800  +6.4 -4.8 4.8 2 3 2 6 10 6 2
26to30 650-750  +6.4 -4.8 4.8 3 6 5 10
32to48 800-1200  +6.4 -4.8 4.8 5 6 5 10
All Fittings[Note(1) and (2)] Center-to-End Diamensions Nominal Pipe Size(NPS) DN Angularity Tolerance
Nominal  Pipe Size(NPS) DN Outside Diameter at Bevel,D[Note(3) and (4)] Inside Diameter at End [Note(3) and (5)] Outside Diameter of Lap,G Fillet Radius of Lap,R Lap Thickness Off Angle,Q Off Plane,P
 1/2to2 1/2 15-65  +1.6-0.8 0.8 +0,-1 +0,-1 +1.6,-0 1/2to4 15-100 1 2
3to3 1/2 80-90 1.6 1.6 +0,-1 +0,-1 +1.6,-0 5to8 125-200 2 4
4 100 1.6 1.6 +0,-1 +0,-2 +1.6,-0 10to12 250-300 3 5
5to8 125-200  +2.4 -1.6 1.6 +0,-1 +0,-2 +1.6,-0 14to16 350-400 3 6
10to18 250-450  +4.0 -3.2 3.2 +0,-2 +0,-2 +3.2,-0 18to24 450-800 4 `10
20to24 500-800  +6.4 -4.8 4.8 +0,-2 +0,-2 +3.2,-0 26to30 650-750 5 10
26to30 650-750  +6.4 -4.8 4.8 32to42 800-1050 5 13
32to48 800-1200  +6.4 -4.8 4.8 44to48 1100-1200 5 19

GENERAL NOTES:
(a)All dimensions are in mm.
(b)Tolerances are equal plus and minus except as noted.

NOTES:
(1)The inside diameter and the nominal wall thicknesat ends are to be specified by the purchaser.
(2)A minimum wall thickness of 87.5% applies unless the purchaser specifies a different wall thickness toletance.
(3)Out-of-round is the sum of absolute values of plus and minus tolerances.

Incoloy 800 Buttweld Fittings Dimensions

Dimensions and weights of ASME B16.9 Incoloy 800 Buttweld 45 Degree Elbow, 90 Degree Elbows Short and Long Radius (NPS 1/2 to 24, schedule STD/XS)

Inconel 800 Buttweld Fittings Dimensions-45 Degree Elbow, 90 Degree Elbows

Pipe Elbow Nominal Size Pipe Elbow Outside
Diameter Y
Wall Thickness T
(Pipe Elbow Schedule)
45 Deg. Elbow LR Centre to Face B 45 Deg. Elbow LR
Weight
90 Deg. Elbow LR Centre to Face A 90 Deg. Elbow LR Weight 90 Deg. Elbow SR Centre to Face A 90 Deg. Elbow SR Weight
mm in mm mm Schedule mm kg mm kg mm kg
15 1/2” 21.3 2.78 STD 15.9 0.04 38.1 0.08
3.73 X.S 15.9 0.05 38.1 0.10
20 3/4” 26.7 2.87 STD 11.1 0.04 28.6 0.08
3.91 X.S 11.1 0.05 28.6 0.11
25 1” 33.4 3.38 STD 22.2 0.09 38.1 0.15 25.4 0.11
4.55 X.S 22.2 0.11 38.1 0.19 25.4 0.14
32 11/4” 42.2 3.56 STD 25.4 0.14 47.6 0.28 31.75 0.18
4.85 X.S 25.4 0.2 47.6 0.39 31.75 0.24
40 11/2” 48.3 3.68 STD 28.6 0.2 57.1 0.4 38.1 0.26
5.08 X.S 28.6 0.25 57.1 0.5 38.1 0.35
50 2” 60.3 3.91 STD 34.9 0.36 76.2 0.72 50.8 0.5
5.54 X.S 34.9 0.5 76.2 1.0 50.8 0.68
65 21/2” 73.0 5.16 STD 44.4 0.73 95.2 1.46 63.5 0.95
7.01 X.S 44.4 0.91 95.2 1.82 63.5 1.27
80 3” 88.9 5.49 STD 50.8 1.1 114.3 2.18 76.2 1.45
7.62 X.S 50.8 1.45 114.3 2.86 76.2 1.95
100 4” 114.3 6.02 STD 63.5 2.1 152.4 4.2 101.6 2.8
8.56 X.S 63.5 2.9 152.4 5.7 101.6 3.9
125 5” 141.3 6.65 STD 79.4 3.4 190.0 6.8 127.0 4.8
9.5 X.S 79.4 5.0 190.0 10.0 127.0 6.5
150 6” 168.3 7.11 STD 95.2 5.1 229.0 10.1 152.4 6.8
10.97 X.S 95.2 7.7 229.0 15.3 152.4 10.2
200 8” 219.1 8.18 STD 127.0 10.2 305.0 20.4 203.0 13.6
12.7 X.S 127.0 15.5 305.0 30.9 203.0 20.9
250 10” 273.9 9.27 STD 159.0 18.1 381.0 36.1 254.0 24.1
12.7 X.S 159.0 24.4 381.0 48.8 254.0 32.5
300 12” 323.9 9.52 STD 190.0 26.6 457.0 53.1 305.0 35.4
12.7 X.S 190.0 35.0 457.0 70.0 305.0 46.7
350 14” 355.6 9.52 STD 222.0 34.1 533.0 68.1 356.0 45.4
12.7 X.S 222.0 45.0 533.0 90.0 356.0 60.0
400 16” 406.4 9.52 STD 254.0 45.0 610.0 89.3 406.0 59.5
12.7 X.S 254.0 59.0 610.0 118.0 406.0 78.7
450 18” 457.0 9.52 STD 286.0 56.5 686.0 113.0 457.0 75.6
12.7 X.S 286.0 75.0 686.0 150.0 457.0 100.0
500 20” 508.0 9.52 STD 318.0 85.0 762.0 140.0 508.0 93.5
12.7 X.S 318.0 112.5 762.0 186.0 508.0 124.0
800 24” 610.00 9.52 STD 381.0 101.5 914.0 203.0 610.0 135.0
12.7 X.S 381.0 134.5 914.0 269.0 610.0 179.0

Dimensions and weights of ASME B16.9 Incoloy 800 Buttweld Tee and Cap (NPS 1/2 to 24, schedule STD/XS)

Inconel 800 Buttweld Fittings Dimensions-Tee and Cap

Buttweld Tee and Cap
Nominal Size
Pipe Tee and Cap Outside
Diameter Y
Pipe Tee and Cap Wall
Thickness T
Buttweld Tee
Dimensions
(C and M)
Buttweld Tee
Weight
Buttweld Cap
End to End
Buttweld Cap
Weight
mm in mm mm Schedule mm mm mm kg
15 1/2” 21.3 2.78 STD 25.4 0.58
3.73 X.S 25.4 0.21
20 3/4” 26.7 2.87 STD 28.6 0.21
3.91 X.S 28.6 0.27
25 1” 33.4 3.38 STD 38.1 0.34 38.1 0.1
4.55 X.S 38.1 0.43 38.1 0.14
32 11/4” 42.2 3.56 STD 47.6 0.64 38.1 0.14
4.85 X.S 47.6 0.75 38.1 0.18
40 11/2” 48.3 3.68 STD 57.1 0.95 38.1 0.18
5.08 X.S 57.1 1.13 38.1 0.23
50 2” 60.3 3.91 STD 63.5 1.45 38.1 0.27
5.54 X.S 63.5 1.72 38.1 0.32
65 21/2” 73.0 5.16 STD 76.2 2.45 38.1 0.41
7.01 X.S 76.2 2.95 38.1 0.45
80 3” 88.9 5.49 STD 85.7 3.45 50.8 0.64
7.62 X.S 85.7 4.3 50.8 0.82
100 4” 114.3 6.02 STD 105.0 5.7 63.5 1.13
8.56 X.S 105.0 7.3 63.5 1.54
125 5” 141.3 6.65 STD 124.0 9.1 76.2 1.91
9.5 X.S 124.0 11.8 76.2 2.59
150 6” 168.3 7.11 STD 143.0 13.6 88.9 2.95
10.97 X.S 143.0 19.0 88.9 4.1
200 8” 219.1 8.18 STD 178.0 25.0 101.6 5.0
12.7 X.S 178.0 33.5 101.6 7.3
250 10” 273.0 9.27 STD 216.0 41.0 127.0 9.1
12.7 X.S 216.0 54.0 127.0 12.0
300 12” 323.9 9.52 STD 254.0 57.0 152.4 13.6
12.7 X.S 254.0 77.0 152.4 17.0
350 14” 355.6 9.52 STD 279.0 73.0 165.1 15.9
12.7 X.S 279.0 93.0 165.1 21.0
400 16” 406.4 9.52 STD 305.0 91.0 178.8 20.0
12.7 X.S 305.0 120.0 178.8 26.0
450 18” 457.0 9.52 STD 343.0 127.0 203.2 26.0
12.7 X.S 343.0 165.0 203.2 34.0
500 20” 508.0 9.52 STD 381.0 227.0 228.6 33.0
12.7 X.S 381.0 270.0 228.6 43.0
800 24” 610.0 9.52 STD 432.0 345.0 266.7 46.0
12.7 X.S 432.0 430.0 266.7 61.0

Dimensions and Weights of ASME B16.9 Incoloy 800 Buttweld Concentric Reducers and Eccentric Reducers(NPS 1/2 to 24, schedule STD/XS)

Inconel 800 Buttweld Fittings Dimensions-Concentric Reducers and Eccentric Reducers

Buttweld Reducer
Nominal Size
Pipe Reducer Length H Pipe Reducer Schedule T Pipe Reducer
Weight
mm in mm Kg
20×15 3/4” x 1/2” 38.1 STD 0.07
XS 0.1
25×15 1” x 1/2” 50.8 STD 0.14
X.S 0.18
25×20 1” x 3/4” 50.8 STD 0.14
X.S 0.18
32×15 11/4” x 1/2” 50.8 STD 0.18
X.S 0.23
32×20 11/4” x 3/4“ 50.8 STD 0.18
X.S 0.23
32×25 11/4” x 1” 50.8 STD 0.18
X.S 0.23
40×15 11/2” x 1/2” 63.5 STD 0.27
X.S 0.32
40×20 11/2” x 3/4” 63.5 STD 0.27
X.S 0.32
40×25 11/2” x 1” 63.5 STD 0.27
X.S 0.32
40×32 11/2” x 11/4” 63.5 STD 0.27
X.S 0.32
50×15 2” x 1/2” 76.2 STD 0.41
X.S 0.54
50×20 2” x 3/4” 76.2 STD 0.41
X.S 0.54
50×25 2”x1” 76.2 STD 0.41
X.S 0.54
50×32 2” x 11/4” 76.2 STD 0.41
X.S 0.54
50×40 2” x 11/2” 76.2 STD 0.41
X.S 0.54
65×25 21/2” x 1” 88.9 STD 0.68
X.S 0.91
65×32 21/2” x 11/4” 88.9 STD 0.68
X.S 0.91
65×40 21/2” x 11/2” 88.9 STD 0.68
X.S 0.91
65×50 21/2” x 2” 88.9 STD 0.68
X.S 0.91
80×40 3” x 11/2” 88.9 STD 0.77
X.S 1.09
80×50 3”x2” 88.9 STD 0.91
X.S 1.22
80×65 3” x 21/2” 88.9 STD 0.91
X.S 1.27
100×40 4” x 11/2” 101.6 STD 1.36
X.S 1.91
100×50 4”x2” 101.6 STD 1.40
X.S 1.95
100×65 4” x 21/2” 101.6 STD 1.45
X.S 2.04
100×80 4”x3” 101.6 STD 1.59
X.S 2.08
125×80 5”x3” 127.0 STD 2.5
X.S 3.4
125 x 100 5”x4” 127.0 STD 2.7
X.S 3.8
150×50 6”x2” 140.0 STD 3.4
X.S 4.3
150×65 6” x 21/2” 140.0 STD 3.4
X.S 4.5
150×80 6”x3” 140.0 STD 3.6
X.S 4.8
150 x 100 6”x4” 140.0 STD 3.7
X.S 5.2
150 x 125 6”x5” 140.0 STD 3.9
X.S 5.4
200×80 8”x3” 152.4 STD 4.5
X.S 7.2
200 x 100 8”x4” 152.4 STD 5.0
X.S 7.7
200 x 125 8”x5” 152.4 STD 5.4
X.S 8.2
200 x 150 8”x6” 152.4 STD 5.9
X.S 8.6
250 x 100 10”x4” 178.0 STD 9.1
X.S 11.8
250 x 125 10”x5” 178.0 STD 9.5
X.S 13.6
250 x 150 10”x6” 178.0 STD 9.5
X.S 13.6
250 x 200 10”x8” 178.0 STD 10.0
X.S 14.0
300 x 150 12”x6” 203.0 STD 14.1
X.S 18.1
300 x 200 12”x8” 203.0 STD 14.5
X.S 19.1
300 x 250 12” x 10” 203.0 STD 15.4
X.S 20.0
350 x 200 14”x8” 330.0 STD 26.3
X.S 34.9
350 x 250 14” x 10” 330.0 STD 27.2
X.S 36.3
350 x 300 14” x 12” 330.0 STD 28.6
X.S 37.6
400 x 200 16”x8” 356.0 STD 31.8
X.S 42.6
400 x 250 16” x 10” 356.0 STD 33.1
X.S 43.5
400 x 300 16” x 12” 356.0 STD 34.5
X.S 45.4
400 x 350 16” x 14” 356.0 STD 35.4
X.S 46.3
450 x 250 18” x 10” 381.0 STD 38.0
X.S 52.1
450 x 300 18” x 12” 381.0 STD 39.0
X.S 53.5
450 x 350 18” x 14” 381.0 STD 40.0
X.S 54.9
450 x 400 18” x 16” 381.0 STD 40.8
X.S 53.5
500 x 250 20” x 10” 508.0 STD 53.0
X.S 79.9
500 x 300 20” x 12” 508.0 STD 54.4
X.S 82.0
500 x 350 20” x 14” 508.0 STD 57.6
X.S 80.2
500 x 400 20” x 16” 508.0 STD 58.9
X.S 82.0
500 x 450 20” x 18” 508.0 STD 61.7
X.S 82.0
800 x 300 24” x 12” 508.0 STD 63.5
X.S 84.4
800 x 350 24” x 14” 508.0 STD 65.3
X.S 86.8
800 x 400 24” x 16” 508.0 STD 68.0
X.S 90.4
800 x 450 24” x 18” 508.0 STD 72.6
X.S 96.5
800 x 500 24” x 20” 508.0 STD 77.1
X.S 102.5
Incoloy 800 Buttweld Fittings Types
Note: Prices are based on product, material grade and quantity. Contact us anytime to get full quotation.
ASTM B366 Incoloy 800 Buttweld Pipe Fittings – Applications & Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Incoloy Alloy 800 Buttweld Pipe Fittings. We supply ANSI B16.9 Incoloy 800 Pipe Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Incoloy 800/800H/800HT Pipe Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Incoloy Alloy 800H Pipe Fittings requirement. We offer Alloy 800HT Pipe Fittings which are accurately designed to provide satisfaction to our customers. We have huge ready stock of   Incoloy 800 Buttweld Elbow, Incoloy 800H Tee, Reducer, Bend, Cross, End Caps, Stub Ends, Coller, Pipe Nipple at our valuable customers end. Buy ASTM B366 Incoloy 800HT Pipe Fittingat a lowest price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us