RTJ Flange ASME B16.5 Dimensions, Ring Joint Face Flange, ASME B16.47 RTJ Flange, Female RTJ Flange Manufacturer in India

Ring Type Joint Flange Suppliers

We as Metalfed Engineering are a prominent supplier and exporter of Ring Type Joint Flanges, which are resistant to a wide range of corrosive media and are not hardened by heat treatment. Uses in springs, truck and trailer bodies, trains, and subways are some of the main applications for this versatile Stainless Steel Ring Type Joint Flanges. It is also used in cars, hubcaps, roof drainage products, table linens, storm door frames, conveyor belts, sinks, subway cars, and home appliances. Hot hardening is not suitable for this Carbon Steel Ring Type Joint Flanges, which can better withstand mechanical forces under room temperature conditions. Annealing should occur at 1850°F – 2050°F followed by rapid cooling.
ASME B16.5 Ring Type Joint Flanges is the ideal choice for applications that require good ductility. The best corrosion resistance of such products is achieved in the annealed condition. It is then heated to 500°F – 900°F to relieve stress and then the material is air-cooled. Solution Heat Treatment (Anneal) for this Class 900 Ring Type Joint Flanges should be up to 1010 degrees C – 1120 degrees C and cool rapidly. It can be found in a variety of applications such as Oil & Gas, Chemical, Fertilizer, Refinery, Petrochemical, Power, Automotive, Bearing, and Mechanical & Structural Equipment.

A Specialized Manufacturer of ANSI B16.5 Ring Type Joint Flange, FN RTJ Flange, FF RTJ Flange, RF Ring Type Joint Flange, AWWA C207 Ring Type Joint Flange, Oval RTJ Flange, Octagonal RTJ Flange in all Dimensions.

RTJ Flange Gasket may not be suitable for certain demanding forming applications where multiple forming operations are required. Class 1500 Ring Type Joint Flanges has good oxidation resistance at temperatures up to 1550 degrees F but is not recommended for use above 1600 degrees F.

Largest Stockholder of Ring Type Joint Blind Flange, BS10 RTJ Flange, EN 1092-1 RTJ Flange, RTJ Flange JIS 10k 5k, Table E & Table H RTJ Flange, ANSI B16.5 Class 150#, 300#, 600#, 900#, 1500#, 2500# RTJ Flanges, RTJ Flange PN16 at Best Prices.

ASME B16.5 / ASME B16.47 Ring Type Joint Flange Specifications
Product Name: Ring Type Joint Flange, RTJ Flange
Size Chart: 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Dimensions: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Rating ANSI: Class 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN: PN6 PN10 PN16 PN25 PN40 PN64 / 6Bar 10Bar 16Bar 25Bar 40Bar
Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Connection Type/Flange Face Type: RF-Raised Face, RTJ-Ring Type Joint, FF-Flat Face, LMF-Large Male-Female, LJF-Lap-Joint Face, SMF-Small Male-Female, Small Tongue, Large Tongue & Groove, Groove
Custom Flange/Special Design: As per your drawing
Standards: ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, BS Flanges, ASME Flanges, EN Flanges, DIN Flanges, ASME/ANSI B16.5/16.36/16.47A/16.47B, GOST Flange, MSS SP44, ISO70051, BS1560-3.1, JISB2220, API7S-43, API7S-15, API605, EN1092
Flange Test: Direct-reading Spectrograph, X-ray detector, Hydrostatic testing machine, UI trasonic flaw detector, Magnetic particle detector
Flanges Equipment: Press machine, Pushing Machine, Bending machine, electric bevelling machine, Sand-blasting machine, etc
Manufacturers of: DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British Standard (BS)
ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
ASTM A182 Ring Type Joint Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Test Certificates: Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Applications: Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders, Offshore, Piping Projects etc.
Export Network: Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc
Ring Type Joint Flange Materials and Grades
Duplex Steel Ring Type Joint Flange: ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Super Duplex Ring Type Joint Flange: ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Stainless Steel Ring Type Joint Flange: ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Nickel Alloys Ring Type Joint Flange: ASTM SB564, SB160, SB472, SB162 – Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)
Alloys Ring Type Joint Flange: Alloy 20, Alloy C, Alloy C276, Alloy B2
Carbon Steel Ring Type Joint Flange: STM / ASME A/SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52
Copper Alloys Ring Type Joint Flange: ASTM SB 61, SB62, SB151, SB152 – UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
Low Temperature Steel Ring Type Joint Flange: ASTM A350 LF2, LF3, LF6
High Yield Ring Type Joint Flange: ASTM A694 F42, F52, F60, F65, F70
Alloy Steel Ring Type Joint Flange: ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Titanium Ring Type Joint Flange: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11
Brass Ring Type Joint Flange: 2604 / 3602 / H59 / H62 / etc.
Aluminium Ring Type Joint Flange: 2017 / 5052 / 6063 / 6061 / 7075 etc.
Alloy 20 Ring Type Joint Flange: ASME SB462 / ASTM B462, Carpenter® 20 Alloy, Alloy 20Cb-3
Nimonic Ring Type Joint Flange: Nimonic 80A, Nimonic 75, Nimonic 90
254 SMO Ring Type Joint Flange: ASME SA182 / ASTM A182, SMO 254/6Mo, UNS S31254, DIN 1.4547
Other Ring Type Joint Flange Material: Tin bronze, Alumunum bronze, Lead bronze
Class 150 Ring Type Joint Flange Dimensions
Size in Inch Size in mm Outer Dia. Flange Thickness Hub OD Weld Neck OD Welding Neck Length RTJ RF Dia RTJ RF Height PCD RTJ Pitch dia RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 90 9.6 30 21.3 46 N/A N/A 60.3 N/A N/A N/A Refer Note
3/4 20 100 11.2 38 26.7 51 N/A N/A 69.9 N/A N/A N/A
1 25 110 12.7 49 33.4 54 63.5 6.35 79.4 47.63 6.35 8.74
1 1/4 32 115 14.3 59 42.2 56 73 6.35 88.9 57.15 6.35 8.74
1 1/2 40 125 15.9 65 48.3 60 82.5 6.35 98.4 65.07 6.35 8.74
2 50 150 17.5 78 60.3 62 102 6.35 120.7 82.55 6.35 8.74
2 1/2 65 180 20.7 90 73 68 121 6.35 139.7 101.6 6.35 8.74
3 80 190 22.3 108 88.9 68 133 6.35 152.4 114.3 6.35 8.74
3 1/2 90 215 22.3 122 101.6 70 154 6.35 177.8 131.78 6.35 8.74
4 100 230 22.3 135 114.3 75 171 6.35 190.5 149.23 6.35 8.74
5 125 255 22.3 164 141.3 87 194 6.35 215.9 171.45 6.35 8.74
6 150 280 23.9 192 168.3 87 219 6.35 241.3 193.68 6.35 8.74
8 200 345 27 246 219.1 100 273 6.35 298.5 247.65 6.35 8.74
10 250 405 28.6 305 273 100 330 6.35 362 304.8 6.35 8.74
12 300 485 30.2 365 323.8 113 406 6.35 431.8 381 6.35 8.74
14 350 535 33.4 400 355.6 125 425 6.35 476.3 396.88 6.35 8.74
16 400 595 35 457 406.4 125 483 6.35 539.8 454.03 6.35 8.74
18 450 635 38.1 505 457.2 138 546 6.35 577.9 517.53 6.35 8.74
20 500 700 41.3 559 508 143 597 6.35 635 558.8 6.35 8.74
24 600 815 46.1 663 610 151 711 6.35 749.3 673.1 6.35 8.74

NOTE: WN bore is derived from the pipe schedule

Class 300 Ring Type Joint Flange Dimensions
Size in Inch Size in mm Outer Dia. Flange Thickness Hub OD Weld Neck OD Welding Neck Length RTJ RF Dia RTJ RF Height PCD RTJ Pitch dia RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 95 12.7 38 21.3 51 51 5.54 66.7 34.14 5.54 7.14 Refer Note
3/4 20 115 14.3 48 26.7 56 63.5 6.35 82.6 42.88 6.35 8.74
1 25 125 15.9 54 33.4 60 70 6.35 88.9 50.8 6.35 8.74
1 1/4 32 135 17.5 64 42.2 64 79.5 6.35 98.4 60.33 6.35 8.74
1 1/2 40 155 19.1 70 48.3 67 90.5 6.35 114.3 68.27 6.35 8.74
2 50 165 20.7 84 60.3 68 108 7.92 127 82.55 7.92 11.91
2 1/2 65 190 23.9 100 73 75 127 7.92 149.2 101.6 7.92 11.91
3 80 210 27 117 88.9 78 146 7.92 168.3 123.83 7.92 11.91
3 1/2 90 230 28.6 133 101.6 79 159 7.92 184.2 131.78 7.92 11.91
4 100 255 30.2 146 114.3 84 175 7.92 200 149.23 7.92 11.91
5 125 280 33.4 178 141.3 97 210 7.92 235 180.98 7.92 11.91
6 150 320 35 206 168.3 97 241 7.92 269.9 211.12 7.92 11.91
8 200 380 39.7 260 219.1 110 302 7.92 330.2 269.88 7.92 11.91
10 250 445 46.1 321 273 116 356 7.92 387.4 323.85 7.92 11.91
12 300 520 49.3 375 323.8 129 413 7.92 450.8 381 7.92 11.91
14 350 585 52.4 425 355.6 141 457 7.92 514.4 419.1 7.92 11.91
16 400 650 55.6 483 406.4 144 508 7.92 571.5 469.9 7.92 11.91
18 450 710 58.8 533 457 157 575 7.92 628.6 533.4 7.92 11.91
20 500 775 62 587 508 160 635 9.53 685.8 584.2 9.53 13.49
24 600 915 68.3 702 610 167 749 11.13 812.8 692.15 11.13 16.66

IMP. NOTE: WN bore is derived from the pipe schedule

Class 600 Ring Type Joint Flange Dimensions
Size in Inch Size in mm Outer Dia. Flange Thickness Hub OD Weld Neck OD Welding Neck Length RTJ RF Dia RTJ RF Height PCD RTJ Pitch dia RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 95 14.3 38 21.3 52 51 5.54 66.7 34.14 5.54 7.14 Refer Note
3/4 20 115 15.9 48 26.7 57 63.5 6.35 82.6 42.88 6.35 8.74
1 25 125 17.5 54 33.4 62 70 6.35 88.9 50.8 6.35 8.74
1 1/4 32 135 20.7 64 42.2 67 79.5 6.35 98.4 60.33 6.35 8.74
1 1/2 40 155 22.3 70 48.3 70 90.5 6.35 114.3 68.27 6.35 8.74
2 50 165 25.4 84 60.3 73 108 7.92 127 82.55 7.92 11.91
2 1/2 65 190 28.6 100 73 79 127 7.92 149.2 101.6 7.92 11.91
3 80 210 31.8 117 88.9 83 146 7.92 168.3 123.83 7.92 11.91
3 1/2 90 230 35 133 101.6 86 159 7.92 184.2 131.78 7.92 11.91
4 100 275 38.1 152 114.3 102 175 7.92 215.9 149.23 7.92 11.91
5 125 330 44.5 189 141.3 114 210 7.92 266.7 180.98 7.92 11.91
6 150 355 47.7 222 168.3 117 241 7.92 292.1 211.12 7.92 11.91
8 200 420 55.6 273 219.1 133 302 7.92 349.2 269.88 7.92 11.91
10 250 510 63.5 343 273 152 356 7.92 431.8 323.85 7.92 11.91
12 300 560 66.7 400 323.8 156 413 7.92 489 381 7.92 11.91
14 350 605 69.9 432 355.6 165 457 7.92 527 419.1 7.92 11.91
16 400 685 76.2 495 406.4 178 508 7.92 603.2 469.9 7.92 11.91
18 450 745 82.6 546 457 184 575 7.92 654 533.4 7.92 11.91
20 500 815 88.9 610 508 190 635 9.53 723.9 584.2 9.53 13.49
24 600 940 101.6 718 610 203 749 11.13 838.2 692.15 11.13 16.66

NOTE: WN bore is derived from the pipe schedule

Class 900 Ring Type Joint Flange Dimensions
Size in Inch Size in mm Outer Dia. Flange Thickness Hub OD Weld Neck OD Welding Neck Length RTJ RF Dia RTJ RF Height PCD RTJ Pitch dia RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 120 22.3 38 21.3 60 60.5 6.35 82.6 39.67 6.35 8.74 Refer Note
3/4 20 130 25.4 44 26.7 70 66.5 6.35 88.9 44.45 6.35 8.74
1 25 150 28.6 52 33.4 73 71.5 6.35 101.6 50.8 6.35 8.74
1 1/4 32 160 28.6 64 42.2 73 81 6.35 111.1 60.33 6.35 8.74
1 1/2 40 180 31.8 70 48.3 83 92 6.35 123.8 68.27 6.35 8.74
2 50 215 38.1 105 60.3 102 124 7.92 165.1 95.25 7.92 11.91
2 1/2 65 245 41.3 124 73 105 137 7.92 190.5 107.95 7.92 11.91
3 80 240 38.1 127 88.9 102 156 7.92 190.5 123.83 7.92 11.91
4 100 290 44.5 159 114.3 114 181 7.92 235 149.23 7.92 11.91
5 125 350 50.8 190 141.3 127 216 7.92 279.4 180.98 7.92 11.91
6 150 380 55.6 235 168.3 140 241 7.92 317.5 211.12 7.92 11.91
8 200 470 63.5 298 219.1 162 308 7.92 393.7 269.88 7.92 11.91
10 250 545 69.9 368 273 184 362 7.92 469.9 323.85 7.92 11.91
12 300 610 79.4 419 323.8 200 419 7.92 533.4 381 7.92 11.91
14 350 640 85.8 451 355.6 213 467 11.13 558.8 419.1 11.13 16.66
16 400 705 88.9 508 406.4 216 524 11.13 616 469.9 11.13 16.66
18 450 785 101.6 565 457 229 594 12.7 685.8 533.4 12.7 19.84
20 500 855 108 622 508 248 648 12.7 749.3 584.2 12.7 19.84
24 600 1040 139.7 749 610 292 772 15.88 901.7 692.15 15.88 26.97

NOTE: WN bore is derived from the pipe schedule

Class 1500 Ring Type Joint Flange Dimensions
Size in Inch Size in mm Outer Dia. Flange Thickness Hub OD Weld Neck OD Welding Neck Length RTJ RF Dia RTJ RF Height PCD RTJ Pitch dia RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 120 22.3 38 21.3 60 60.5 6.35 82.6 39.67 6.35 8.74 Refer Note
3/4 20 130 25.4 44 26.7 70 66.5 6.35 88.9 44.45 6.35 8.74
1 25 150 28.6 52 33.4 73 71.5 6.35 101.6 50.8 6.35 8.74
1 1/4 32 160 28.6 64 42.2 73 81 6.35 111.1 60.33 6.35 8.74
1 1/2 40 180 31.8 70 48.3 83 92 6.35 123.8 68.27 6.35 8.74
2 50 215 38.1 105 60.3 102 124 7.92 165.1 95.25 7.92 11.91
2 1/2 65 245 41.3 124 73 105 137 7.92 190.5 107.95 7.92 11.91
3 80 265 47.7 133 88.9 117 168 7.92 203.2 136.53 7.92 11.91
4 100 310 54 162 114.3 124 194 7.92 241.3 161.93 7.92 11.91
5 125 375 73.1 197 141.3 156 229 7.92 292.1 193.68 7.92 11.91
6 150 395 82.6 229 168.3 171 248 9.53 317.5 211.14 9.53 13.49
8 200 485 92.1 292 219.1 213 318 11.13 393.7 269.88 11.13 16.66
10 250 585 108 368 273 254 371 11.13 482.6 323.85 11.13 16.66
12 300 675 123.9 451 323.8 283 438 14.27 571.5 381 14.27 23.01
14 350 750 133.4 495 355.6 298 489 15.88 635 419.1 15.88 26.97
16 400 825 146.1 552 406.4 311 546 17.48 704.8 469.9 17.48 30.18
18 450 915 162 597 457 327 613 17.48 774.7 533.4 17.48 30.18
20 500 985 177.8 641 508 356 673 17.48 831.8 584.2 17.48 33.32
24 600 1170 203.2 762 610 406 794 20.62 990.6 692.15 20.62 36.53

NOTE: WN bore is derived from the pipe schedule

Class 2500 Ring Type Joint Flange Dimensions
Size in Inch Size in mm Outer Dia. Flange Thickness Hub OD Weld Neck OD Welding Neck Length RTJ RF Dia RTJ RF Height PCD RTJ Pitch dia RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 135 30.2 43 21.3 73 65 6.35 88.9 42.88 6.35 8.74 Refer Note
3/4 20 140 31.8 51 26.7 79 73 6.35 95.2 50.8 6.35 8.74
1 25 160 35 57 33.4 89 82.5 6.35 108 60.33 6.35 8.74
1 1/4 32 185 38.1 73 42.2 95 102 7.92 130.2 72.23 7.92 11.91
1 1/2 40 205 44.5 79 48.3 111 114 7.92 146 82.55 7.92 11.91
2 50 235 50.9 95 60.3 127 133 7.92 171.4 101.6 7.92 11.91
2 1/2 65 265 57.2 114 73 143 149 9.53 196.8 111.13 9.52 13.49
3 80 305 66.7 133 88.9 168 168 9.53 228.6 127 9.52 13.49
4 100 355 76.2 165 114.3 190 203 11.13 273 157.18 11.13 16.66
5 125 420 92.1 203 141.3 229 241 12.7 323.8 190.5 12.7 19.84
6 150 485 108 235 168.3 273 279 12.7 368.3 228.6 12.7 19.84
8 200 550 127 305 219.1 318 340 14.27 438.2 279.4 14.27 23.01
10 250 675 165.1 375 273 419 425 17.48 539.8 342.9 17.48 30.18
12 300 760 184.2 441 323.8 464 495 17.48 619.1 406.4 17.48 33.32

NOTE: WN bore is derived from the pipe schedule

RTJ Flanges Types and Standards
  • rtj flange en 1092-1
  • ASME B16.5 rtj flanges
  • rf ff rtj Flanges
  • api rtj flanges
  • copper rtj flanges
  • rtj flanges class 300
  • blind rtj flange
  • rtj orifice flange
  • rtj pipe flange
  • rtj raised face flange
  • rtj flat face flange
  • female rtj flange
  • class 150 rtj flange
  • rtj flange pn 16
  • weld neck flange rtj
  • ff rtj flange
  • 150# rtj flange
  • Aluminium rtj flange
  • 150 LB rtj flange
  • 300 LB rtj flange
  • fn rtj flange
  • ansi 1500 rtj flange
  • rtj flange sch 80
  • stainless steel rtj flange
  • rtj flange welding
  • carbon steel rtj flange
  • class 600 rtj flange
  • class 900 rtj flange
  • ss rtj flange
  • api 6a rtj flange
  • ansi 900 rtj flange
  • jis rtj flange
  • ansi 600 ring type joint flange
Ring Type Joint Flange Applications & Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality ASME B16.5 Ring Type Joint Flange. We supply ASME B16.47 Ring Type Joint Flange to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Ring Type Joint Flange Export to

AfricaAlgeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

EuropeAlbania, Andorra, Armenia, Austria, Azerbaijan, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Kazakhstan, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Oman, Pakistan, Palestine, Philippines, Qatar, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Ring Type Joint Flange requirement. We offer ANSI B16.5 Ring Type Joint Flange, and ASME B16.5 RTJ Flanges which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these  Class 150#, 300#, 400#, 600#, 900#, 1500#, 2500#, Ring Type Joint Flange at our valuable customers end. Buy Ring Type Joint Flangeat a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us