Mastodon
sales@metalfed.com
+91 9137898594

0
was successfully added to your cart.

HomeIndustrial Pipe Flanges SupplierASME B16.5 Weld Neck Flange

ASME B16.5 Weld Neck Flange

Weld Neck Flange Series A Manufacturer, PN16 Rasied Face Weld Neck Flange Series B, ASME B16.5 Weld Neck Flange Dimensions

Weld Neck Flange SuppliersWe as Metalfed Engineering are a prominent manufacturer and stockist of Weld Neck Flanges, which offer good strength and toughness at cryogenic temperatures. Series A Weld Neck Flange is non-magnetic and will not be affected by additional heat treatment. ASME B16.5 Weld Neck Flanges is a standard specification for chromium and chromium-nickel steel used for pressure vessels and for general applications. Weld Neck Flange Series B offers excellent corrosion resistance and mechanical properties.
Series A and Series B Weld Neck Flange represents an excellent combination of corrosion resistance and manufacturability. BS4504 Weld Neck Flange is widely used in the construction of nuclear reprocessing plants. It is an alloy of nickel and copper, together in the company of having fortification elements like iron and manganese. Much higher forging pressures are required than for plain and low-alloy steels. General-purpose steel, Carbon Steel Weld Neck Flanges was developed to offer increased corrosion resistance. RTJ Weld Neck Flange is used for welding applications due to its lower carbon content. If carbide precipitates are a problem, Class 300 Weld Neck Flanges may be a better option because of their inferior content of carbon material. It is used to shape wire, washers, shape springs, spring clip, retainers, shield, cable, etc.ASME B16.5 Weld Neck Flange Suppliers, Weld Neck Series A / Series B Flange

Well-Known Exporter of Series A and Series B Weld Neck Flange, Weld Neck Flange PN10 PN16 PN 25 PN 40, WNFF, WNRF, Weld Neck Raised Face and Flat Face Flange, BS4504 Weld Neck Flange, API 6A Weld Neck Flange, EN 1092-1 Weld Neck RTJ Flange in all Dimensions.

Table of Content

We stock these Stainless Steel Weld Neck Flanges in various tempers from annealed to fully hard. Raised Face Weld Neck Flanges is commonly used in high temperature applications and can be supplied in the rolled, annealed condition. The amount of chromium in these flanges depends on the desired quality of the end product, and other elements can be incorporated into the alloy to give it specific properties and capabilities.

Reputed Stockists of Weld-neck Flange Type 11 B PN40, Table E & Table D Weld Neck Flanges, JIS Weld Neck Flange, DIN 2633 / 2635 Weld Neck Flange Schedule 40 Schedule 80, ANSI B16.5 Class 150#, 300#, 600#, 900#, 1500#, 2500# Weld Neck Flanges, Weld Neck Flange PN16 at Best Prices.

ASME B16.5 / ASME B16.47 Weld Neck Flange Specifications
Product Name: Weld Neck Flange | WN Flange | WNFF Flange | WNRF Flange
Size Chart: 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Dimensions: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Rating ANSI: Class 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN: PN6 PN10 PN16 PN25 PN40 PN64 / 6Bar 10Bar 16Bar 25Bar 40Bar
Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Connection Type/Flange Face Type: RF-Raised Face, RTJ-Ring Type Joint, FF-Flat Face, LMF-Large Male-Female, LJF-Lap-Joint Face, SMF-Small Male-Female, Small Tongue, Large Tongue & Groove, Groove
Custom Flange/Special Design: As per your drawing
Standards: ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, BS Flanges, ASME Flanges, EN Flanges, DIN Flanges, ASME/ANSI B16.5/16.36/16.47A/16.47B, GOST Flange, MSS SP44, ISO70051, BS1560-3.1, JISB2220, API7S-43, API7S-15, API605, EN1092
Flange Test: Direct-reading Spectrograph, X-ray detector, Hydrostatic testing machine, UI trasonic flaw detector, Magnetic particle detector
Flanges Equipment: Press machine, Pushing Machine, Bending machine, electric bevelling machine, Sand-blasting machine, etc
Manufacturers of: DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British Standard (BS)
ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
ASTM A182 Weld Neck Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Test Certificates: Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Applications: Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders, Offshore, Piping Projects etc.
Export Network: Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

Weld Neck Flange Materials and Grades
Duplex Steel Weld Neck Flange: ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Super Duplex Weld Neck Flange: ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Stainless Steel Weld Neck Flange: ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Nickel Alloys Weld Neck Flange: ASTM SB564, SB160, SB472, SB162 – Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)
Alloys Weld Neck Flange: Alloy 20, Alloy C, Alloy C276, Alloy B2
Carbon Steel Weld Neck Flange: STM / ASME A/SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52
Copper Alloys Weld Neck Flange: ASTM SB 61, SB62, SB151, SB152 – UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
Low Temperature Steel Weld Neck Flange: ASTM A350 LF2, LF3, LF6
High Yield Weld Neck Flange: ASTM A694 F42, F52, F60, F65, F70
Alloy Steel Weld Neck Flange: ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Titanium Weld Neck Flange: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11
Brass Weld Neck Flange: 2604 / 3602 / H59 / H62 / etc.
Aluminium Weld Neck Flange: 2017 / 5052 / 6063 / 6061 / 7075 etc.
Alloy 20 Weld Neck Flange: ASME SB462 / ASTM B462, Carpenter® 20 Alloy, Alloy 20Cb-3
Nimonic Weld Neck Flange: Nimonic 80A, Nimonic 75, Nimonic 90
254 SMO Weld Neck Flange: ASME SA182 / ASTM A182, SMO 254/6Mo, UNS S31254, DIN 1.4547
Other Weld Neck Flange Material: Tin bronze, Alumunum bronze, Lead bronze

Class 150 LBS Weld Neck Flange Dimensions
ANSI, ASME, ASA, B16.5 150lb/sq.in. WELDING NECK FLANGE RF
ø D b g m a J* h k Holes l Kg.
1/2″ 88,9 11,1 34,9 30,2 21,3 15,7 47,6 60,3 4 15,9 0,500
3/4″ 98,4 12,7 42,9 38,1 26,7 20,8 52,4 69,8 4 15,9 0,700
1″ 107,9 14,3 50,8 49,2 33,5 26,7 55,6 79,4 4 15,9 1,100
1 1/4″ 117,5 15,9 63,5 58,8 42,2 35,1 57,1 88,9 4 15,9 1,500
1 1/2″ 127,0 17,5 73,0 65,1 48,3 40,9 61,9 98,4 4 15,9 1,800
2″ 152,4 19,0 92,1 77,8 60,3 52,6 63,5 120,6 4 19,0 2,700
2 1/2″ 177,8 22,2 104,8 90,5 73,1 62,7 69,8 139,7 4 19,0 4,400
3″ 190,5 23,8 127,0 107,9 88,9 78,0 69,8 152,4 4 19,0 5,200
3 1/2″ 215,9 23,8 139,7 122,2 101,6 90,2 71,4 177,8 8 19,0 6,400
4″ 228,6 23,8 157,2 134,9 114,3 102,4 76,2 190,5 8 19,0 7,500
5″ 254,0 23,8 185,7 163,5 141,2 128,3 88,9 215,9 8 22,2 9,200
6″ 279,4 25,4 215,9 192,1 168,4 154,2 88,9 241,3 8 22,2 11,000
8″ 342,9 28,6 269,9 246,1 219,1 202,7 101,6 298,4 8 22,2 18,300
10″ 406,4 30,2 323,8 304,8 273,0 254,5 101,6 361,9 12 25,4 25,000
12″ 482,6 31,7 381,0 365,1 323,8 304,8 114,3 431,8 12 25,4 39,000
14″ 533,4 34,9 412,7 400,0 355,6 336,5 127,0 476,2 12 28,6 51,000
16″ 596,9 36,5 469,9 457,2 406,4 387,3 127,0 539,7 16 28,6 60,000
18″ 635,0 39,7 533,4 504,8 457,2 438,1 139,7 577,8 16 31,7 71,000
20″ 698,5 42,9 584,2 558,8 508,0 488,9 144,5 635,0 20 31,7 88,000
22″ 749,3 46,0 641,2 609,6 558,8 539,7 149,2 692,1 20 34,9 102,000
24″ 812,8 47,6 692,1 663,6 609,6 590,5 152,4 749,3 20 34,9 119,000
* The data “J” corresponds to the STD schedule

NOTES:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
3. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
4. A depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inches, over 3 inch is at the manufacturer’s option.
5. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
6. Welding Neck Flange Bore Size SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS

Class 300 LBS Weld Neck Flange Dimensions
ANSI, ASME, ASA B16.5 300lb/sq.in. WELDING NECK FLANGE RF
ø D b g m a J* h k Holes l Kg.
1/2″ 95,2 14,3 34,9 38,1 21,3 15,7 52,4 66,7 4 15,9 0,900
3/4″ 117,5 15,9 42,9 47,6 26,7 20,8 57,1 82,5 4 19,0 1,500
1″ 123,8 17,5 50,8 54,0 33,5 26,7 61,9 88,9 4 19,0 1,900
1 1/4″ 133,3 19,0 63,5 63,5 42,2 35,1 65,1 98,4 4 19,0 2,600
1 1/2″ 155,6 20,6 73,0 69,8 48,3 40,9 68,3 114,3 4 22,2 3,300
2″ 165,1 22,2 92,1 84,1 60,3 52,6 69,8 127,0 8 19,0 3,600
2 1/2″ 190,5 25,4 104,8 100,0 73,1 62,7 76,2 149,2 8 22,2 5,400
3″ 209,5 28,6 127,0 117,5 88,9 78,0 79,4 168,3 8 22,2 7,400
3 1/2″ 228,6 30,2 139,7 133,3 101,6 90,2 81,0 184,1 8 22,2 8,900
4″ 254,0 31,7 157,2 146,0 114,3 102,4 85,7 200,0 8 22,2 11,900
5″ 279,4 34,9 185,7 177,8 141,2 128,3 98,4 234,9 8 22,2 16,000
6″ 317,5 36,5 215,9 206,4 168,4 154,2 98,4 269,9 12 22,2 20,200
8″ 381,0 41,3 269,9 260,3 219,1 202,7 111,1 330,2 12 25,4 31,000
10″ 444,5 47,6 323,4 320,7 273,0 254,5 117,5 387,3 16 28,6 44,300
12″ 520,7 50,8 381,0 374,6 323,8 304,8 130,2 450,8 16 31,7 64,000
14″ 584,2 54,0 412,7 425,4 355,6 336,5 142,9 514,3 20 31,7 88,000
16″ 647,7 57,1 469,9 482,6 406,4 387,3 146,0 571,5 20 34,9 113,000
18″ 711,2 60,3 533,4 533,4 457,2 438,1 158,7 628,6 24 34,9 134,000
20″ 774,7 63,5 584,2 587,4 508,0 488,9 161,9 685,8 24 34,9 171,000
22″ 838,2 66,7 641,2 641,2 558,8 539,7 165,1 742,9 24 41,3 195,000
24″ 914,4 69,8 692,1 701,7 609,6 590,5 168,3 812,8 24 41,3 238,000
* The data “J” corresponds to the STD schedule

NOTES:
1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
3. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
4. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
5. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
6. Welding Neck Flange Bore Size SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS

Class 600 LBS Weld Neck Flange Dimensions
ANSI/ASME/ASA B16.5 600lb/sq.in. WELDING NECK FLANGE RF
ø D b g m a J* h k Holes l Kg.
1/2″ 95,2 14,3 34,9 38,1 21,3 15,7 52,4 66,7 4 15,9 0,900
3/4″ 117,5 15,9 42,9 47,6 26,7 20,9 57,1 82,5 4 19,0 1,500
1″ 123,8 17,5 50,8 54,0 33,5 26,7 61,9 88,9 4 19,0 1,900
1 1/4″ 133,3 20,6 63,5 63,5 42,2 35,0 66,7 98,4 4 19,0 2,600
1 1/2″ 155,6 22,2 73,0 69,8 48,3 40,9 69,8 114,3 4 22,2 3,300
2″ 165,1 25,4 92,1 84,1 60,3 52,6 73,0 127,0 8 19,0 4,700
2 1/2″ 190,5 28,6 104,8 100,0 73,1 62,7 79,4 149,2 8 22,2 6,500
3″ 209,5 31,7 127,0 117,5 88,9 78,0 82,5 168,3 8 22,2 8,700
3 1/2″ 228,6 34,9 139,7 133,3 101,6 90,1 85,7 184,1 8 25,4 11,200
4″ 273,0 38,1 157,2 152,4 114,3 102,4 101,6 215,9 8 25,4 18,100
5″ 330,2 44,4 185,7 188,9 141,2 128,2 114,3 266,7 8 28,6 30,500
6″ 355,6 47,6 215,9 222,2 168,4 154,2 117,5 292,1 12 28,6 36,200
8″ 419,1 55,6 269,9 273,0 219,1 202,7 133,3 349,2 12 31,7 56,500
10″ 508,0 63,5 323,8 342,9 273,0 254,5 152,4 431,8 16 34,9 91,000
12″ 558,8 66,7 381,0 400,0 323,8 304,8 155,6 488,9 20 34,9 105,000
14″ 603,2 69,8 412,7 431,8 355,6 * 165,1 527,0 20 38,1 125,000
16″ 685,8 76,2 469,9 495,3 406,4 177,8 603,2 20 41,3 178,000
18″ 742,9 82,5 533,4 546,1 457,2 184,1 654,0 20 44,4 261,000
20″ 812,8 88,9 584,2 609,6 508,0 190,5 723,9 24 44,4 268,000
22″ 869,9 95,2 641,2 666,7 558,8 196,8 777,9 24 47,6 328,000
24″ 939,8 101,6 692,1 717,5 609,6 203,2 838,2 24 50,8 380,000
* The data “J” corresponds to the STD schedule
To be specifiedby customer

NOTES:
1. Class 600 flanges except Lap Joint will be furnished with 0.25 (6.35mm) raised face, which is not included in ‘ Thickness’ (C) and ‘ Length through Hub’ (Y1), (Y3).
2. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
3. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
4. Dimensions of sizes 1/2 through 3 1/2 are the same as for Class 400 Flanges.
5. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
6. A depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inches, over 3 inch is at the manufacturer’s option.
7. Welding Neck Flange Bore Size SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS

ASME B16.5 Weld Neck Flange Schedule Chart
WELDING NECK FLANGES BORES (in inchines)
Nom
Pipe
Size		 Outside
Diam		 Sched
10		 Sched
20		 Sched
30		 Std.
Wall		 Sched
40		 Sched
60		 Extra
Strong		 Sched
80		 Sched
100		 Sched
120		 Sched
140		 Sched
160		 Double
Extra
Strong
1/2” 0.840 0.674 – – 0.622 0.622 – 0.546 0.546 – – – 0.464 0.252
3/4” 1.050 0.884 – – 0.824 0.824 – 0.742 0.742 – – – 0.612 0.434
1” 1.315 1.097 – – 1.049 1.049 – 0.957 0.957 – – – 0.815 0.599
1.1/4” 1.660 1.442 – – 1.380 1.380 – 1.278 1.278 – – – 1.160 0.896
1.1/2” 1.900 1.682 – – 1.610 1.610 – 1.500 1.500 – – – 1.338 1.100
2” 2.375 2.157 – – 2.067 2.067 – 1.939 1.939 – – – 1.687 1.503
2.1/2” 2.875 2.635 – – 2.469 2.469 – 2.323 2.323 – – – 2.125 1.771
3” 3.500 3.260 – – 3.068 3.068 – 2.900 2.900 – – – 2.624 2.300
3-1/2” 4.000 3.760 – – 3.548 3.548 – 3.364 3.364 – – – – 2.728
4” 4.500 4.260 – – 4.026 4.026 – 3.826 3.826 – 3.624 – 3.438 3.152
5” 5.563 5.295 – – 5.047 5.047 – 4.813 4.813 – 4.563 – 4.313 4.063
6” 6.625 6.357 – – 6.065 6.065 – 5.761 5.761 – 5.501 – 5.187 4.897
8” 8.625 8.329 8.125 8.071 7.981 7.981 7.813 7.625 7.625 7.437 7.187 7.001 6.813 6.875
10” 10.750 10.420 10.250 10.136 10.020 10.020 9.750 9.750 9.562 9.312 9.062 8.750 8.500 8.750
12” 12.750 12.390 12.250 12.090 12.000 11.938 11.626 11.750 11.374 11.062 10.750 10.500 10.126 10.750
14” 14.000 13.500 13.376 13.250 13.250 13.124 12.812 13.000 12.500 12.124 11.814 11.500 11.188 –
16” 16.000 15.500 15.376 15.250 15.250 15.000 14.688 15.000 14.312 13.938 13.564 13.124 12.812 –
18” 18.000 17.500 17.376 17.124 17.250 16.876 16.500 17.000 16.124 15.688 15.250 14.876 14.438 –
20” 20.000 19.500 19.250 19.000 19.250 18.812 18.376 19.000 17.938 17.438 17.000 16.500 16.062 –
24” 24.000 23.500 23.250 22.876 23.250 22.624 22.062 23.000 21.562 20.938 20.376 19.876 19.312 –
30” 30.000 29.376 29.000 28.750 29.250 – – 29.000 – – – – – –
36” 36.000 35.376 35.000 34.750 35.250 34.500 – 35.000 – – – – – –
42” 42.000 – – – 41.250 – – 41.000 – – – – – –

Weld Neck Flange Weight Chart in KG
ANSI B16.5 WELD NECK FLANGES WEIGHT (KGS)
Nom
Pipe
Size		 150# 300# 600# 900# 1500# 2500#
WN S/O B/K WN S/O B/K WN S/O B/K WN S/O B/K WN S/O B/K WN S/O B/K
1/2” 0.7 0.4 0.5 0.8 0.7 0.8 0.9 0.8 0.8 2.1 1.8 1.9 2.1 1.8 1.9 3.2 3 3
3/4” 0.8 0.7 0.8 1.4 1.2 1.2 1.6 1.4 1.4 2.7 2.4 2.7 2.7 2.4 2.7 3.6 4 4.5
1” 1.1 0.8 0.9 1.7 1.4 1.5 1.9 1.7 1.7 3.9 3.6 3.7 3.9 3.6 3.7 5.4 5 5
1.1/4” 1.5 1.2 1.3 2.2 1.8 2 2.6 2.1 2.4 4.5 4.1 4.3 4.5 4.1 4.3 7.8 8 8
1.1/2” 1.8 1.4 1.6 3.2 2.7 2.9 3.6 3.1 3.4 6.2 5.4 5.9 6.2 5.4 5.9 11.5 11 11
2” 2.7 2.2 2.6 3.6 3.2 3.5 4.7 3.9 4.4 11.3 10.5 11.3 11.3 10.5 11.3 19 17 17
2.1/2” 4.4 3.5 4.1 5.4 4.5 5.3 4.8 5.4 6.8 16.3 15.8 16 16.3 15.8 16 24 25 25
3” 5.2 3.8 5.1 7.3 5.9 7.2 8.7 7.3 8.9 15 12.3 16.8 21 21.5 19.5 42.6 38 39
3-1/2” 6.4 5 6.5 8.9 7.5 9.2 11.6 9 12.7 – – – – – – – – –
4” 7.5 5.6 7.5 11.8 10 12.2 18.4 16.5 18.6 24 23.2 24.5 31.8 31 33 64 58 60
5” 9.2 6.5 9.2 16 12.5 16 31 28.5 30.8 38.5 37.5 39.5 59 58.8 60 111 95 101
6” 11.0 8.1 11.8 20.2 16.5 22 37 36.2 38 50 48.3 51.5 72 74 75 171 146 156
8” 18.4 13 20.4 31.2 25.5 36 54.5 51.5 62.2 85 75 89 124 112 125 261 220 242
10” 25.5 18.4 31 44.3 35 55 98.5 76.2 102 123 110 131 207 184 215 485 420 465
12” 37 28.5 47 63.5 52 82.5 105 89.5 132 168 146 187 306 264 316 698 590 665
14” 51 37.5 60 86 73 108 150 102 158 198 172 224 416 – – – – –
16” 61.5 44.5 61 112 88 139 177 150 225 225 192 259 567 – – – – –
18” 71.5 54 93 141 115 178 228 180 285 318 272 383 736 – – – – –
20” 85 72 127 173 139 228 285 231 365 376 330 482 929 – – – – –
24” 119 95 190 248 212 350 372 330 532 680 632 905 1504 – – – – –

Weld Neck Flanges Types and Standards
  • weld neck flange en 1092-1
  • weld neck flange series a
  • ASME B16.5 weld neck flanges
  • weld neck reducing Flanges
  • din 2635 weld neck flanges
  • copper weld neck flanges
  • weld neck flanges class 300
  • reducing weld neck flange
  • weld neck orifice flange
  • weld neck rtj flange
  • weld neck raised face flange
  • weld neck flat face flange
  • weld neck flange series b
  • class 150 weld neck flange
  • ansi 300 weld neck flange
  • weld neck flange pn25
  • weld neck flange pn 16
  • weld neck orifice flange
  • 150# weld neck flange
  • Aluminium weld neck flange
  • din 2633 weld neck flange pn40
  • 300 LB weld neck flange
  • weld neck flange pn10
  • weld neck orifice flange
  • weld neck flange sch 80
  • stainless steel weld neck flange
  • weld neck anchor flange
  • weld neck flange welding
  • carbon steel weld neck flange
  • class 600 weld neck flange
  • class 900 weld neck flange
  • ss weld neck flange
  • welding neck flange pn63
  • weld neck flange class 2500
  • jis weld neck flange
  • rasied face weld neck flange

Weld Neck Flange Applications & Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality ASME B16.5 Weld Neck Flange. We supply ASME B16.47 Weld Neck Flange to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Weld Neck Flange Export to

AfricaAlgeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

EuropeAlbania, Andorra, Armenia, Austria, Azerbaijan, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Kazakhstan, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Oman, Pakistan, Palestine, Philippines, Qatar, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

Weld Neck Flange Series A Manufacturer, PN16 Rasied Face Weld Neck Flange Series B, ASME B16.5 Weld Neck Flange Dimensions

CONTACT

Please send us the complete details of Weld Neck Flange requirement. We offer ANSI B16.5 Weld Neck Flange, and ASME B16.5 SORF & SOFF Flanges which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these  Class 150#, 300#, 400#, 600#, 900#, 1500#, 2500#, Weld Neck Flange at our valuable customers end. Buy Weld Neck Flanges at a cheap price from us.

sales@metalfed.com | +91 9999999999 | Quotation Form | Reach Us