Mastodon
sales@metalfed.com
+91 9137898594

0
was successfully added to your cart.

HomeASME B16.11 Forged Fittings Copper Nickel Forged Fittings SupplierCopper Nickel 70/30 Forged Fittings Supplier

Copper Nickel 70/30 Forged Fittings Supplier

Manufacturer of Cupro Nickel 70/30 Threaded Fittings, ASTM B466 UNS C71500 Socket Weld Fittings, Cu-Ni 70-30 High Pressure Forged Fittings in India.

Copper Nickel 70/30 Forged Fittings Suppliers in India

Copper Nickel 70/30 Forged Fittings very ductile alloys can only be strengthened by cold work, and so it is being the stronger and capable of handling higher flow rates. Cupro Nickel 70 / 30 Forged Threaded Reducing Tee Fittings have important additions of iron and manganese, which are necessary to maintain good corrosion resistance in harsh environments. Its erosion-corrosion is also improved by the addition of iron and manganese. Copper Nickel WNR 2.0882 Forged Threaded Lateral Tee Fittings can be found in naval and commercial shipping, offshore oil and gas production as well as desalination and power generation. Copper Nickel 70 / 30 Forged Threaded Cross Fittings is the most commercial alloys and usually contains manganese, iron, and tin to improve specific properties, whereas cast alloys also have additions of niobium and silicon.
We as a Metalfed Engineering are a popular supplier, exporter, and distributor of Cu-Ni 70 / 30 Forged Threaded Fittings, which is corrosion resistant in most environments. The alloys are single-phase and cannot be hardened by heat treatment. Much like its ability to exist in seawater without corroding, Copper Nickel 70 / 30 Forged Threaded Fittings are also resistant to the growth of algae, sea moss, anemones, and mollusks. They are Ductile, Can be hardened only by cold working, and have good corrosion resistance.

Exporter of CuNi 70-30 Forged Cross, Copper Nickel 70/30 Socketweld Coupling, Copper Nickel Alloy 70/30 Threaded Tee, Cupro Nickel 70/30 Forged Elbow, ASME 16.11 Copper Nickel 70/30 Threaded Pipe Cap, 70/30 Copper Nickel Industrial Forged Fittings.

Table of Content

Copper Nickel UNS C71500 Forged Threaded Tee Fittings are used for marine applications due to their resistance to seawater corrosion, good fabricability, and their effectiveness in lowering macrofouling levels. Buy Copper Nickel 70/30 Forged Fittings and Copper Nickel 90/10 Forged Fittings at reasonable rate.

Value Added Services

  • Epoxy Coating
  • Electro Polish
  • Sand Blasting
Testing

  • Intergranular Corrosion Test
  • Tensile Test
  • Hardness Test
Features

  • Good load bearing capacity
  • Excellent versatility and weldability
  • High tensile strength

Largest Stockholder of ASME SB466 Cu-Ni 70-30 Socket weld Coupling, Copper Nickel 70/30 Socket weld Fittings, Cu-Ni 70-30 Threaded Elbow, DIN 2.0882 Forged Tee, Cross, Copper Nickel 70/30 Forged End Cap, Copper Nickel 70/30 Forged Union in all Dimensions.

Copper Nickel 70/30 Forged Fittings Specifications
Product Name: Copper Nickel 70/30 Forged Fittings
Specifications: ASTM B122, B171, B466, B467
Size: 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Dimensions: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Pressure Class: Threaded End- 2000LBS/ 3000LBS/ 6000LBS
Socket-weld End- 3000LBS/ 6000LBS/ 9000LBS
Thread: BSPT, NPT, BSPP
Test Certificates: Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Manufacturers of: 90º Elbows, 45º Elbows, Equal Tee, Reducing Tee, Lateral Tee, Cross, Reducers, Half Coupling, Full Coupling, End Cap, Union, Reducer Insert, Boss, Nipple, Adapters, Street Elbow, Reducing Coupling, Bushing, Hex Plug, Square Head Plug, Round Head Plug, Bull Plug, Branch Outlet, 90° Outlet Elbow.
Uses & Applications: Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders.
Export Network: Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

Copper Nickel 70/30 Forged Fittings Equivalent Grades
STANDARD WERKSTOFF NR. UNS
Copper Nickel 70/30 2.0882 C71500

Cu-Ni 70-30 Forged Fittings Chemical Composition
Grade Cu Mn Pb Ni Fe Zn
Cu – Ni 70/30 65.0 min 1.0 max .05 max 29 – 33 0.04 – 1.0 1 max

ASTM B466 UNS C71500 Copper Nickel Forged Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Cu-Ni 70-30 0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %

Copper Nickel 70/30 Forged Fittings Size Range
Below Mentioned Forged Fittings Size: 1/8″– 4″
Pressure Ratings – 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
ASTM B466 Copper Nickel 70/30 90° Elbow ASTM B466 Copper Nickel 70/30 Forged Tee
ASTM B466 Copper Nickel 70/30 Forged Cross ASTM B466 Copper Nickel 70/30 Street Elbow
ASTM B466 Copper Nickel 70/30 Screwed Bushing ASTM B466 Copper Nickel 70/30 Socket weld Cap
ASTM B466 Copper Nickel 70/30 Forged Plug ASTM B466 Copper Nickel 70/30 45° Elbow
ASTM B466 Copper Nickel 70/30 Union ASTM B466 Copper Nickel 70/30 Insert
ASTM B466 Copper Nickel 70/30 Threaded Pipe Nipple ASTM B466 Copper Nickel 70/30 Screwed Coupling

ASTM B466 Cu-Ni 70-30 Forged Fittings Manufacturing Standards
American Steel Forged Fittings Standard
Standard Name Standard Code
Forged fittings ANSI ASME SB-466
Socket-welding and Threaded forged fittings ANSI ASME B16.11
Socket-welding reducing Inserts MSS SP-79
Class 3000 steel socket-welding and threaded unions MSS SP-83
Swaged nipples and round plugs MSS SP-95
SW,TH and BW ends for integrally reinforced forged branch outlet MSS SP-97

Copper Nickel 70/30 Forged Fittings Dimensions

ASME B16.11 Threaded Fittings 90º Elbow, 45º Elbow, Cross, Tee. All dimensions are in inches

Nominal Pipe Size Centre to End Elbows, Tee, Crosses A Centre to End 45º Elbows C Outside Diameter of Band H Minimum Wall Thickness G Lengths of Thread Min
2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# B L2
1/8 13/16 13/16 31/32 11/16 11/16 3/4 7/8 7/8 1 .125 .125 .250 .25 .2639
1/4 13/16 31/32 1-1/8 11/16 3/4 7/8 7/8 1 1-5/16 .125 .130 .260 .32 .4018
3/8 3/32 1-1/8 1-5/16 3/4 7/8 1 1 1-5/16 1-1/2 .125 .138 .275 .36 .4078
1/2 1-1/8 1-5/16 1-1/2 7/8 1 1-1/8 1-5/16 1-1/2 1-13/16 .125 .161 .321 .43 .5337
3/4 1-5/16 1-1/2 1-3/4 1 1-1/8 1-5/16 1-1/2 1-13/16 2-3/16 .123 .168 .336 .50 .5457
1 1-1/2 1-3/4 2 1-1/8 1-5/16 1-3/8 1-13/16 2-3/16 2-7/16 .145 .196 .391 .58 .6828
1-1/4 1-3/4 2 2-3/8 1-15/16 1-3/8 1-11/16 2-3/16 2-7/16 2-31/32 .153 .208 .417 .67 .7068
1-1/2 2 2-3/8 2-1/2 1-3/8 1-11/16 1-23/32 2-7/16 2-31/32 3-5/16 .158 .218 .436 .70 .7235
2 2-3/8 2-1/2 3-3/4 1-11/16 1-23/32 2-1/16 2-31/32 3-5/16 4 .168 .238 .476 .75 .7565
2-1/2 3 3-1/4 3-3/4 2-1/16 2-1/16 2-1/2 3-5/8 4 4 .221 .301 .602 .932 1.138
3 3-3/8 3-3/4 4-3/16 2-1/2 2-1/2 3-1/8 4-5/16 4-3/4 4-3/4 .236 .327 .655 1.016 1.200
4 3-3/16 4-1/2 4-1/2 3-1/8 3-1/8 3-1/8 5-3/4 5 6 .258 .368 .735 1.094 1.300

ASME B16.11 Copper Nickel 70/30 Threaded Fitting Coupling, Half Coupling, Cap. All dimensions are in inches. Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American Standard for Pipe Threads (ASA B3. 1).

Nominal Pipe Size End to End Couplings W End to
End Caps H		 Outside
Diameter D		 End Wall Thickness
G Min		 Length of
Thead Min
3000# &
6000#		 3000# 6000# 3000# 6000# 3000# 6000# B L2
1/8 1-1/4 3/4 5/8 7/8 3/16 .25 .2639
1/4 1-3/8 1 1-1/16 3/4 1 3/16 1/4 .32 .4018
3/8 1-1/2 1 1-1/16 7/8 1-1/4 3/16 1/4 .36 .4078
1/2 1-7/8 1-1/4 1-5/16 1-1/8 1-1/2 1/4 5/16 .43 .5337
3/4 2 1-7/16 1-1/2 1-3/8 1-3/4 1/4 5/16 .50 .5457
1 2-3/8 1-5/8 1-11/16 1-3/4 2-1/4 3/8 7/16 .58 .6828
1-1/4 2-5/8 1-3/4 1-13/16 2-1/4 2-1/2 3/8 7/16 .67 .7068
1-1/2 3-1/8 1-3/4 1-7/8 2-1/2 3 7/16 1/2 .70 .7235
2 3-3/8 1-7/8 2 3 3-5/8 1/2 5/8 .75 .7565
2-1/2 3-5/8 2-3/8 2-1/2 3-5/8 4-1/4 5/8 3/4 .932 1.138
3 4-1/4 2-9/16 2-11/16 4-1/4 5 3/4 7/8 1.016 1.200
4 4-3/4 2-11/16 2-15/16 5-1/2 6-1/4 7/8 1-1/8 1.094 1.300

ASME B16.11 Copper Nickel 70/30 Threaded Fittings Plugs, Bushings. All dimensions are in inches.

Nominal Pipe Size Thead

Length (min)
A

 Plugs Square Head Plugs Round Head Hexagon Plugs
& Bushings
Height of Square (min)
B		 Width Flats (min)
C		 Nominal Diameter of Head

E

 Length (min)
D		 Width Flats (min)
F		 Hexagon Height min
Bushings G Plug
H
1/8 3/8 1/4 9/32 13/32 1-3/8 7/16 – 1/4
1/4 7/16 1/4 3/8 17/32 1-5/8 5/8 1/8 1/4
3/8 1/2 5/16 7/16 11/16 1-5/8 11/16 5/32 5/16
1/2 9/16 3/8 9/16 27/32 1-3/4 7/8 3/16 5/16
3/4 5/8 7/16 5/8 1-1/16 1-3/4 1-1/16 7/32 3/8
1 3/4 1/2 13/16 1-5/16 2 1-3/8 1/4 3/8
1-1/4 13/16 9/16 15/16 1-11/16 2 1-3/4 9/32 9/16
1-1/2 13/16 5/8 1-1/8 1-29/32 2 2 5/16 5/8
2 7/8 11/16 1-5/16 2-3/8 2-1/2 2-1/2 11/32 11/16
2-1/2 1-1/16 3/4 1-1/2 2-7/8 2-3/4 3 3/8 3/4
3 1-1/8 13/16 1-11/16 3-1/2 2-3/4 3-1/2 13/32 13/16
3-1/2 1-3/16 7/8 1-7/8 4 3 4-1/8 7/16 7/8
4 1-1/4 1-1/4 2-1/2 4-1/2 3 4-5/8 1/2 1-1/4

Copper Nickel 70/30 Forged Fittings Weight Chart -Pounds per 100 pcs
Name WorkingPress. 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” # per 100 pcs
90º Ells S/W 3000# 22 29 53 86 139 198 286 400
90º Ells
Screw		 3000# 29 53 86 139 198 286 400 1452
45º Ells S/W 3000# 22 38 53 86 139 198 374 396
45º Ells Screw 3000# 29 53 86 139 198 374 B3 800
Tees S/W 3000# 31 40 73 106 158 220 317 572
Tees Screw 3000# 40 73 106 158 220 317 512 2090
Union Screw
Union S/W
Coupling S/W 3000# 9 18 26 40 92 152 229 462
Coupling Screw 3000# 9 18 26 40 92 152 229 462
Caps S/W 3000# 11 13 24 37 62 114 147 297
Caps Screw 3000# 11 13 24 37 62 114 147 297
Hex.
Head Plugs		 3000# 4 7 18 26 48 86 99 198
Sq.
Head Plugs		 3000# 2 4 9 18 33 57 73 136
Hex. Bushing 3000# 7 7 9 13 18 42 44 136
Flush
Bushing		 3000# 4 4 7 9 15 33 37 132

Copper Nickel 70/30 Forged Fittings Types and Standards
Note: Prices are based on product, material grade, and quantity. Contact us anytime to get full quotation.
GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

Copper Nickel 70/30 Threaded and Socket Weld Fittings – Applications & Industries

We are leading Manufacturers, Exporters, and Suppliers of high quality Copper Nickel 70/30 High Pressure Forged Fittings. We supply ANSI 16.11 Cu-Ni 70-30 Threaded Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Copper Nickel 70/30 Forged Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Copper Nickel 70/30 Forged Threaded Fittings requirement. We are offering Copper Nickel 70/30 Socket weld Elbow, and Cu-Ni 70-30 Socket weld Tee which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these  Cupro Nickel 70/30 Forged Elbow, Tee, Reducer Insert, Cross, Coupling, Union, Boss, Bushing, Plug, Nipple, Adapter at our valuable customers end. Buy Copper Nickel 70/30 Forged Fittings at a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us