Manufacturer of Alloy 201 Threaded Fittings, Nickel Alloy 201 Socket weld Fittings, 201 Nickel Alloy High Pressure Forged Fittings in India.

Nickel 201 Forged Fittings Suppliers in India

Nickel 201 Forged Fittings is meant to control carbon which keeps it from being embrittled by intergranular precipitates at temperatures of 600 Degree F to 1400 Degree F in many processes. At higher temperatures, it should be utilized. In the lower carbon chemistry, Ni-201 Forged Threaded Half Coupling Fittings is preferred for service in temperatures above 600 Degree F (315 Degree C). Nickel WNR 2.4068 Forged Threaded Full Coupling Fittings is suitable for forming by deep drawing and spinning into combustion boats and the continuous stamping of strip into electronic components. They are characterized by ferromagnetism, along with high electrical and thermal conductivity. Nickel 201 Forged Threaded Reducing Coupling Fittings is made with above 99% of nickel, which makes it one of the toughest grades of metal which, has excellent formability and fabrication applications.

We as a Metalfed Engineering is an eminent distributor of Nickel Alloy 201 Forged Threaded Fittings, which exhibits excellent mechanical properties and high thermal and electrical conductivity. Its reinforcement effect with the increase of tissue imbalance and tend to be more obvious, and the strength of the alloy steel annealing state than carbon steel has a lot of advantages. Nickel UNS N02201 Forged Threaded Coupling Fittings also has exceptional resistance to caustic alkalis at different concentrations and temperatures.

Largest Stockist of Nickel® Alloy 201 Threaded Tee, Nickel 201 Forged Cross, UNS N02201 Forged Fittings Elbow, ASTM B564 201 Socketweld Coupling, ASME 16.11 Nickel Alloy 201 Threaded Pipe Cap, NA 12 Nickel Industrial Forged Fittingat lowest Price in India.

Nickel Alloy 201 Socket weld Fitting is extremely resistant to a number of reducing chemicals and also is unexcelled in conflict to corroding alkalies. When functioning temperatures are likely to surpass 600 Degree F, then the carbon content turn out to be critical.

Value Added Services

  • Epoxy Coating
  • Electro Polish
  • Sand Blasting
Testing

  • Intergranular Corrosion Test
  • Tensile Test
  • Hardness Test
Features

  • Good load bearing capacity
  • Excellent versatility and weldability
  • High tensile strength

Exporter of Alloy 2.4068 Socket weld Fittings, Nickel 201 Threaded Elbow, Grade 201 Alloy Forged Tee, Cross, ASME SB564 201 Socket weld Coupling, 201 Nickel Forged End Cap, Nickel Alloy 201 Forged Union in all Dimensions.

Nickel Alloy 201 Forged Fittings Specifications
Product Name: Nickel 201 Forged Fittings
Specifications: ASTM / ASME B564
Size: 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Dimensions: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Pressure Class: Threaded End- 2000LBS/ 3000LBS/ 6000LBS
Socket-weld End- 3000LBS/ 6000LBS/ 9000LBS
Thread: BSPT, NPT, BSPP
Test Certificates: Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Manufacturers of: 90º Elbows, 45º Elbows, Equal Tee, Reducing Tee, Lateral Tee, Cross, Reducers, Half Coupling, Full Coupling, End Cap, Union, Reducer Insert, Boss, Nipple, Adapters, Street Elbow, Reducing Coupling, Bushing, Hex Plug, Square Head Plug, Round Head Plug, Bull Plug, Branch Outlet, 90° Outlet Elbow.
Uses & Applications: Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders.
Export Network: Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc
Nickel 201 Forged Fittings Equivalent Grades
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 LC-Ni 99
Alloy 201 Forged Fittings Chemical Composition
Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min
ASTM B564 201 Nickel Forged Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %
Nickel Alloy 201 Forged Fittings Size Range
Below Mentioned Forged Fittings Size: 1/8″– 4″
Pressure Ratings – 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
ASTM B564 Nickel Alloy 201 90° Elbow ASTM B564 Nickel Alloy 201 Forged Tee
ASTM B564 Nickel Alloy 201 Forged Cross ASTM B564 Nickel Alloy 201 Street Elbow
ASTM B564 Nickel Alloy 201 Screwed Bushing ASTM B564 Nickel Alloy 201 Socket weld Cap
ASTM B564 Nickel Alloy 201 Forged Plug ASTM B564 Nickel Alloy 201 45° Elbow
ASTM B564 Nickel Alloy 201 Union ASTM B564 Nickel Alloy 201 Insert
ASTM B564 Nickel Alloy 201 Threaded Pipe Nipple ASTM B564 Nickel Alloy 201 Screwed Coupling
ASTM B564 Nickel 201 Forged Fittings Manufacturing Standards
American Steel Forged Fittings Standard
Standard Name Standard Code
Forged fittings ANSI ASME SB-564
Socket-welding and Threaded forged fittings ANSI ASME B16.11
Socket-welding reducing Inserts MSS SP-79
Class 3000 steel socket-welding and threaded unions MSS SP-83
Swaged nipples and round plugs MSS SP-95
SW,TH and BW ends for integrally reinforced forged branch outlet MSS SP-97
Nickel 201 Forged Fittings Dimensions

ASME B16.11 Threaded Fittings 90º Elbow, 45º Elbow, Cross, Tee. All dimensions are in inches

Nominal Pipe Size Centre to End Elbows, Tee, Crosses A Centre to End 45º Elbows C Outside Diameter of Band H Minimum Wall Thickness G Lengths of Thread Min
2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# B L2
1/8 13/16 13/16 31/32 11/16 11/16 3/4 7/8 7/8 1 .125 .125 .250 .25 .2639
1/4 13/16 31/32 1-1/8 11/16 3/4 7/8 7/8 1 1-5/16 .125 .130 .260 .32 .4018
3/8 3/32 1-1/8 1-5/16 3/4 7/8 1 1 1-5/16 1-1/2 .125 .138 .275 .36 .4078
1/2 1-1/8 1-5/16 1-1/2 7/8 1 1-1/8 1-5/16 1-1/2 1-13/16 .125 .161 .321 .43 .5337
3/4 1-5/16 1-1/2 1-3/4 1 1-1/8 1-5/16 1-1/2 1-13/16 2-3/16 .123 .168 .336 .50 .5457
1 1-1/2 1-3/4 2 1-1/8 1-5/16 1-3/8 1-13/16 2-3/16 2-7/16 .145 .196 .391 .58 .6828
1-1/4 1-3/4 2 2-3/8 1-15/16 1-3/8 1-11/16 2-3/16 2-7/16 2-31/32 .153 .208 .417 .67 .7068
1-1/2 2 2-3/8 2-1/2 1-3/8 1-11/16 1-23/32 2-7/16 2-31/32 3-5/16 .158 .218 .436 .70 .7235
2 2-3/8 2-1/2 3-3/4 1-11/16 1-23/32 2-1/16 2-31/32 3-5/16 4 .168 .238 .476 .75 .7565
2-1/2 3 3-1/4 3-3/4 2-1/16 2-1/16 2-1/2 3-5/8 4 4 .221 .301 .602 .932 1.138
3 3-3/8 3-3/4 4-3/16 2-1/2 2-1/2 3-1/8 4-5/16 4-3/4 4-3/4 .236 .327 .655 1.016 1.200
4 3-3/16 4-1/2 4-1/2 3-1/8 3-1/8 3-1/8 5-3/4 5 6 .258 .368 .735 1.094 1.300

ASME B16.11 Nickel Alloy 201 Threaded Fitting Coupling, Half Coupling, Cap. All dimensions are in inches. Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American Standard for Pipe Threads (ASA B2. 1).

Nominal Pipe Size End to End Couplings W End to
End Caps H
Outside
Diameter D
End Wall Thickness
G Min
Length of
Thead Min
3000# &
6000#
3000# 6000# 3000# 6000# 3000# 6000# B L2
1/8 1-1/4 3/4 5/8 7/8 3/16 .25 .2639
1/4 1-3/8 1 1-1/16 3/4 1 3/16 1/4 .32 .4018
3/8 1-1/2 1 1-1/16 7/8 1-1/4 3/16 1/4 .36 .4078
1/2 1-7/8 1-1/4 1-5/16 1-1/8 1-1/2 1/4 5/16 .43 .5337
3/4 2 1-7/16 1-1/2 1-3/8 1-3/4 1/4 5/16 .50 .5457
1 2-3/8 1-5/8 1-11/16 1-3/4 2-1/4 3/8 7/16 .58 .6828
1-1/4 2-5/8 1-3/4 1-13/16 2-1/4 2-1/2 3/8 7/16 .67 .7068
1-1/2 3-1/8 1-3/4 1-7/8 2-1/2 3 7/16 1/2 .70 .7235
2 3-3/8 1-7/8 2 3 3-5/8 1/2 5/8 .75 .7565
2-1/2 3-5/8 2-3/8 2-1/2 3-5/8 4-1/4 5/8 3/4 .932 1.138
3 4-1/4 2-9/16 2-11/16 4-1/4 5 3/4 7/8 1.016 1.200
4 4-3/4 2-11/16 2-15/16 5-1/2 6-1/4 7/8 1-1/8 1.094 1.300

ASME B16.11 Nickel Alloy 201 Threaded Fittings Plugs, Bushings. All dimensions are in inches.

Nominal Pipe Size Thead

Length (min)
A

Plugs Square Head Plugs Round Head Hexagon Plugs
& Bushings
Height of Square (min)
B
Width Flats (min)
C
Nominal Diameter of Head

E

Length (min)
D
Width Flats (min)
F
Hexagon Height min
Bushings G Plug
H
1/8 3/8 1/4 9/32 13/32 1-3/8 7/16 1/4
1/4 7/16 1/4 3/8 17/32 1-5/8 5/8 1/8 1/4
3/8 1/2 5/16 7/16 11/16 1-5/8 11/16 5/32 5/16
1/2 9/16 3/8 9/16 27/32 1-3/4 7/8 3/16 5/16
3/4 5/8 7/16 5/8 1-1/16 1-3/4 1-1/16 7/32 3/8
1 3/4 1/2 13/16 1-5/16 2 1-3/8 1/4 3/8
1-1/4 13/16 9/16 15/16 1-11/16 2 1-3/4 9/32 9/16
1-1/2 13/16 5/8 1-1/8 1-29/32 2 2 5/16 5/8
2 7/8 11/16 1-5/16 2-3/8 2-1/2 2-1/2 11/32 11/16
2-1/2 1-1/16 3/4 1-1/2 2-7/8 2-3/4 3 3/8 3/4
3 1-1/8 13/16 1-11/16 3-1/2 2-3/4 3-1/2 13/32 13/16
3-1/2 1-3/16 7/8 1-7/8 4 3 4-1/8 7/16 7/8
4 1-1/4 1-1/4 2-1/2 4-1/2 3 4-5/8 1/2 1-1/4
Nickel Alloy 201 Forged Fittings Weight Chart -Pounds per 100 pcs
Name WorkingPress. 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” # per 100 pcs
90º Ells S/W 3000# 22 29 53 86 139 198 286 400
90º Ells
Screw
3000# 29 53 86 139 198 286 400 1452
45º Ells S/W 3000# 22 38 53 86 139 198 374 396
45º Ells Screw 3000# 29 53 86 139 198 374 600 800
Tees S/W 3000# 31 40 73 106 158 220 317 572
Tees Screw 3000# 40 73 106 158 220 317 512 2090
Union Screw
Union S/W
Coupling S/W 3000# 9 18 26 40 92 152 229 462
Coupling Screw 3000# 9 18 26 40 92 152 229 462
Caps S/W 3000# 11 13 24 37 62 114 147 297
Caps Screw 3000# 11 13 24 37 62 114 147 297
Hex.
Head Plugs
3000# 4 7 18 26 48 86 99 198
Sq.
Head Plugs
3000# 2 4 9 18 33 57 73 136
Hex. Bushing 3000# 7 7 9 13 18 42 44 136
Flush
Bushing
3000# 4 4 7 9 15 33 37 132
Nickel 201 Forged Fittings Types and Standards
Note: Prices are based on product, material grade, and quantity. Contact us anytime to get full quotation.
Nickel Alloy 201 Threaded and Socket Weld Fittings – Applications & Industries

We are leading Manufacturers, Exporters, and Suppliers of high quality Nickel 201 High Pressure Forged Fittings. We supply ANSI 16.11 Alloy 201 Threaded Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Nickel 201 Forged Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Nickel Alloy 201 Forged Threaded Fittings requirement. We are offering Nickel 201 Socket weld Elbow, and Alloy 201 Socket weld Tee which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these  Nickel 201 Forged Elbow, Tee, Reducer Insert, Cross, Coupling, Union, Boss, Bushing, Plug, Nipple, Adapter at our valuable customers end. Buy Nickel Alloy 201 Forged Fittings at a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us

Send Inquiry Using WhatsApp